/
Distribution Settings
Distribution Settings
Introduction
Distribution Settings are available on the radar settings panel.
Contents
Distribution Settings
Processed LUT Enable: Select to enable the 'Look Up Table' and convert all data sourced from the Channel(s) from an opacity based on signal strength to greater opacity. 100% Process LUT Gain makes all Channel data equally opaque red.
Processed LUT Gain: The percentage increase of opacity for Channel data from original opacity based on signal strength.
Related Information
-
Tracker Settings (Radar Settings) (Witness 4.0)
-
Source Type (Witness 4.0)
-
Track Engine Configuration (Witness 4.0)
-
Tracker Connection (Witness 4.0)
-
Channels (Tracker Settings) (Witness 4.0)
-
Advanced Settings (Tracker Settings) (Witness 4.0)
-
Debris (Tracker Settings) (Witness 4.0)
-
Contour Area (Witness 4.0)
-
Distribution Settings (Witness 4.0)
-
Debris Detection (Witness 4.0)
, multiple selections available,
Related content
Upgrade On-Board Tracker
Upgrade On-Board Tracker
Read with this
User - Radar Configuration
User - Radar Configuration
More like this
Clutter Map and Clutter Floor
Clutter Map and Clutter Floor
Read with this
Gain and Offset adjustment tool (contrast/brightness)
Gain and Offset adjustment tool (contrast/brightness)
More like this
Adding ClearWay™ Radar
Adding ClearWay™ Radar
Read with this
Radar Settings
Radar Settings
More like this