Radar Summary
Introduction
This section discusses the information displayed on the Radar Summary page.
Contents
Radar Summary
The Radar Summary page is available within Topology.
Health: The health status of the radar using colour to show Healthy (green) Warning (amber) and Unhealthy (red). If a radar is not assigned to a Track Engine then the icon will be grey.
Name: The name allocated to the radar.
Serial Number: The radar serial number.
User ID: A user friendly ID that can be used for external control, associated with whomever created the radar.
Address: The IP address of the radar.
Model: The radar model number.
Firmware: The firmware version number.
Type: The type of tracker connection; Local, Remote or On Board.
Tracker Version: The On Board Tracker version number.
Track Engine: This shows which track engine the radar is allocated to.
By selecting one of the headers, an operator can order the list. In the example below, the list is ordered by Health; Healthy to Unhealthy:
Click the Refresh icon to refresh the page:
A list of the radar to can be exported as a CSV file by selecting the Export icon:
Related Information
-
Health & Safety (Products)
-
Colossus Record and Playback Tool (Products)
-
Assigning a Camera (Witness 4.0)
-
Source Type (Witness 4.0)
-
Radar (Witness 4.0)
-
Radar to Section Allocation (Witness 4.0)
-
Allocating Radar to Track Engines (Witness 4.0)
-
Adding ClearWay™ Radar (Witness 4.0)
-
Radar Alignment (Witness 4.0)
-
Camera Controllers (Witness 4.0)