AdvanceGuard® V4.10 Release Notes

Introduction

These release notes cover AdvanceGuard® V4.10 and above.

Contents



Version 4.10.0 Build 783 - 01 October 2021

Orca Tracker 4.10.0.223 Release Notes - NavOS 32-Bit Tracker 4.10.0.223 Release Notes - NavOS 64-Bit Tracker 4.10.0.223 Release Notes

Fixed

  • Fixed the incorrect handling of deleted provisional tracks in the tracker

Version 4.10.0 Build 780 - 20 September 2021

Orca Tracker 4.10.0.213 Release Notes - NavOS Tracker 4.10.0.213 Release Notes

Fixed

  • Fixed a memory leak in the Tracker Manager when handling Onboard/Remote Trackers

  • Fixed an issue with the classification track data buffer not running it’s expiry timer to tidy stale tracks

Version 4.10.0 Build 779 - 02 September 2021

Orca Tracker 4.10.0.213 Release Notes - NavOS Tracker 4.10.0.213 Release Notes

Fixed

TUN-4742 - Fixed issue with Hyperspike integration where audio tracks were not being displayed in the UI and token errors were be reported for control messages which were being initiated before connection authorisation.

TUN-4742 - Fixed an concurrency issue with the AlarmList message that was occurring under load with a high level of reported alarms.

Version 4.10.0 Build 777 - 27 August 2021

Orca Tracker 4.10.0.213 Release Notes - NavOS Tracker 4.10.0.213 Release Notes

Fixed

TUN-4768 - Fixed Log Retrieval causing unhandled exceptions

Version 4.10.0 Build 774 - 23 August 2021

Orca Tracker 4.10.0.212 Release Notes - NavOS Tracker 4.10.0.212 Release Notes

Improvements

TUN-4724 - Updated Milestone plugin to ensure the XProtect client video view update is sent every 5 seconds to ensure overlays are updated and cleared reliably

TUN-4723 - Added error handling to Milestone Transmit Message calls which are used as part of the Milestone XProtect client control system

Fixed

TUN-4747 - Fixed issue with radial menu not showing when history tracks are on the PPI

TUN-4740 - Fixed validate check for the folder action rule node when connecting nodes in the wrong order

TUN-4741 - Added a vertical scroll bar automatically for track parameters profile settings to ensure all fields can be seen

Version 4.10.0 Build 764 - 08 August 2021

Orca Tracker 4.10.0.212 Release Notes - NavOS Tracker 4.10.0.212 Release Notes

Fixes

  • TUN-4713 - Fixed issue where the XProtect clients stops receiving latching messages once they have been closed and reopened / reconnected

  • TUN-4179 - Fixed issue where track Id overlays are remaining on video viewers in XProtect client after the track is no longer latched

  • Fixed the issue where a camera viewer absolute position move was not using the previous camera position

Version 4.10.0 Build 763 - 02 August 2021

Orca Tracker 4.10.0.212 Release Notes - NavOS Tracker 4.10.0.212 Release Notes

New Features

  • TUN-4067 - Added the Red Vision RVX2 camera

Version 4.10.0 Build 762 - 26 July 2021

Orca Tracker 4.10.0.212 Release Notes - NavOS Tracker 4.10.0.212 Release Notes

New Features

  • TUN-4638 - Integrated the Avigilon H4 IR Camera

  • TUN-4185 - Introduced new relative and absolute controls in the camera viewers. Absolute control now includes “point to move” where the camera will move to the selected position in the viewer. Relative control now features and click and drag control which enables proportionally movement of the camera in any chosen direction.

  • TUN-4652 - Changed the manual zoom operation in camera viewers to use absolute control. This enables smoother transition between camera operations because we know the zoom level and can also hold a zoom level for certain manual operations such as “point to move”.

Improvements

  • TUN-4688 - Improved handling of last camera target and position to ensure more accurate control when moving between different camera operations

  • TUN-4644 - Improved the ONVIF connection logic so that if we fail on first connection to a camera we still try and reconnect

  • TUN-4658 - Split out weight and strength clusters for the False Alarm Analysis and used weight / range and strength / range clusters instead. Both can be enabled independently now.

  • TUN-4648 - Ensured we do not "disconnect" an ONVIF camera when we get an error from a command. We allow a certain number of failed messages before we consider any ONVIF to be “disconnected”. Even when disconnected the controller will attempt control again after a back-off time.

  • TUN-4663 - Hid the Breaking Tracks column on the Live alarms list.

  • TUN-4617 - Added an optional database health sub-element to the Management Server module element for the ICD-001 Status Report.

Fixes

  • TUN-4643 - Fixed issue with camera communications handling causing unexpected disconnections. This fix appears to overcome a lot of the message unreliability we were experiencing on many of the ONVIF cameras.

  • Fixed 360 Vision RTSP Stream Port Number so it now has the correct default value.

  • TUN-4641 - Resolved memory issue when creating new areas. Each edit and save of an area was causing a memory leak. This was more significant on large areas. This is an important fix although it only really impacts sites which are in commissioning or ones that undergo frequent change.

Due to the changes for splitting out weight and strength from the clusters, the settings for the False Alarm Analysis will have to be re-enabled using the new choices

Version 4.10.0 Build 756 - 25 June 2021

Orca Tracker 4.10.0.211 Release Notes - NavOS Tracker 4.10.0.211 Release Notes

Fixes

  • Fixed issue with legacy radars not correctly applying the encoder count causing radar data to look incorrect

Version 4.10.0 Build 753 - 21 June 2021

Orca Tracker 4.10.0.209 Release Notes - NavOS Tracker 4.10.0.209 Release Notes

Fixes

  • Fixed issue with SightLogix camera and network timeouts

Version 4.10.0 Build 752 - 18 June 2021

Orca Tracker 4.10.0.209 Release Notes - NavOS Tracker 4.10.0.209 Release Notes

New Features

  • TUN-4593 - Implemented the ability to move and fetch logs from a radar & tracker via SSH based on a user schedule

  • TUN-4581 - Added a system schedule including appropriate message to capture radar and OBT logs via SSH

  • TUN-4596 - Added the parameter Min Plot Track to the tracking parameters in Witness and add the parameter to the profile override options

  • TUN-4598 - Added feature to highlight the connector and nodes when you mouse over a connector in the rule editor

Improvements

  • TUN-4615 - Added asset code, latitude and longitude to radar export CSV from the topology radar summary

  • TUN-4634 - Minor improvements to ONVIF service calling to avoid errors when handling empty profiles on the camera

Fixes

  • TUN-4601 - Increased the SSO Path field length to 1000 characters and made the input box multi-line

  • TUN-4594 - Fixed issue where radars were not being selected in the Schedule view for Capture Clutter Floor Later from the Radar Group dialog

Version 4.10.0 Build 738 - 13 May 2021

Orca Tracker 4.10.0.201 Release Notes - NavOS Tracker 4.10.0.201 Release Notes

New Features

  • TUN-4545 Added new Milestone / Siveillance XProtect Client Plugin for managing the automatic display of video feeds in response to operators latching tracks

  • TUN-4491 Added capability to have custom system colours for severity of alarm zones

  • TUN-4544 Enabled use of camera areas with static cameras to ensure static cameras are only considered to be “active” when a target is in their FOV and also inside one or more of the configured camera areas

Improvements

  • TUN-4541 Improved visibility of the static camera FOV outline for both the web and Windows users interfaces

  • TUN-4440 Added zoom scaling to alarm location ellipse line thickness so it scales properly as the PPI is zoomed

  • Increased the maximum allowed camera range setting from 4000m to 12000m

  • TUN-4524 Disabled the mouse wheel of the combo box when it is not editable to avoid accidental changes of the value

  • TUN-4543 Prevent cameras from following tracks which are too close using a configurable min range setting

  • TUN-4518 Ensured a user with only user level access can clear tracks after performing a locate tracks from the pending alarm list

  • TUN-4553 Allowed a slave camera to mirror a master camera configured for both manual and automatic operation

Fixes

  • Fixed error handling Track Engine failover with radars offline. This prevents radar losing their offline status when a Track Engine flip-flops between active and inactive.

  • TUN-4523 Fixed Management Server not starting correctly unless UI installed - removed the dependency between the Management Server and the UI files.

  • TUN-4550 Fixed issue when changing from time to night time and back again in scheduler the times are not editable

  • TUN-4557 Fixed issue with Web UI is not honouring our cascading list of track Id / tag / name priority for display

  • TUN-4550 Fixed night time schedules (based on first/last light) appear to be inverted

  • TUN-4563 Fixed history buttons on track mini control

  • TUN-4574 Fixed PPI windows using camera overwatch going to incorrect positions

  • Fixed issue with user settings reset which was preventing the default settings to be saved

  • Fixed issue with User Settings always able to save on first edit

  • TUN-4575 Fixed PPI windows not zooming from centre position when using +/- buttons

  • TUN-4577 Ensured the MS Plugin can record the UI stream on its own without additional camera mappings

  • Fixed Password Complexity issues when creating a new user or changing a password

Version 4.10.0 Build 723 - 20 April 2021

Orca Tracker 4.10.0.201 Release Notes - NavOS Tracker 4.10.0.201 Release Notes

Fixes

  • Fixed error handling track engine failover with radars offline

  • TUN-4523 Fixed Management Server not starting correctly unless UI installed

Version 4.10.0 Build 717 - 26 March 2021

Orca Tracker 4.10.0.201 Release Notes - NavOS Tracker 4.10.0.201 Release Notes

Fixes

  • Fixed intermittent problem with the tracker to overcome the issue where it was accepting any configuration updates including radar rotation changes.

  • Fixed an issue with the FLIR SDK where one of the calls was not working under .NET Core which prevented the software connecting to a FLIR camera.

  • Fixed an issue with the camera mini control which was preventing it from showing for 360 Vision cameras.

Version 4.10.0 Build 714 - 22 March 2021

Orca Tracker 4.10.0.198 Release Notes - NavOS Tracker 4.10.0.198 Release Notes

Fixes

  • Fixed check for camera selection for Latching to include camera Enabled and connection status

Version 4.10.0 Build 713 - 17 March 2021

Orca Tracker 4.10.0.196 Release Notes - NavOS Tracker 4.10.0.196 Release Notes

Fixes

  • Fixed issue with too many notifications being raised when upgrading a tracker

Version 4.10.0 Build 712 - 15 March 2021

Orca Tracker 4.10.0.196 Release Notes - NavOS Tracker 4.10.0.196 Release Notes

New Feature

  • Added new Tracker Fast Start feature and improvements to the tracker reconnection and initialisation performance

  • TUN-4376 Added a radar summary to the topology (new tab)

Improvement

  • TUN-4399 Added an optional classification to the proximity rule check so we only evaluate true if the distance / time and classifications conditions are met

  • TUN-4398 Added the ability to export the radar topology list as a CSV

  • TUN-4393 Added a UI notification and system log for when a tracker upgrade has finished

  • TUN-4392 Added a UI notification and system log for when a tracker upgrade is started

  • TUN-4358 Added the new tracker disconnection timeout to the tracker config so it can be changed globally in Witness

  • TUN-4347 Added the ability to filter by FA probability in the main track query options (not FA track query)

  • TUN-4338 Added optional map control to the Site Config Report and changed OK button to Cancel

  • TUN-4336 Changed logic so we only prevent radar data being displayed in the UI as a result of a disconnect error

  • TUN-4328 Added a 10min warning notification if the UI 10mins before the unlicensed grace period ends

  • TUN-4327 Added a licence count down in UI title bar showing remaining time for the unlicensed grace period

  • TUN-4285 Reworked the incident report to include its own display control so we can set all the display options independently of the main display

Fixes

  • TUN-4439 Adding a new Truth Data (track) raises exception in UI

  • TUN-4433 The first (single) radar is not visible or editable in the group dialog after inserting

  • TUN-4432 When adding new layers, the active layers drop down in the user settings is not dynamically updated

  • TUN-4430 Remove Edit buttons from side panel group lists for radar and POIs

  • TUN-4410 The first (single) POI is not visible or editable in the group dialog after inserting

  • TUN-4402 Fix problem with firmware reflection error in Camera Device Manager v4.9

  • TUN-4370 New panel windows are never tidied because they are never added to the panel collection

  • TUN-4367 Improve the cluster data saving routines to use appropriate collections and sensible XML structures.

  • TUN-4357 Ensure the SMS plugin works in both and ensure the API works

  • TUN-4356 The RTS Plugin UI element is not initialising properly

  • TUN-4346 Ensure all the report preview dialogs have a title

  • TUN-4344 The first time a user / system logs into the web UI the main map does not load and you get a refresh link.

  • TUN-4335 The zoom control is not working on the report preview control.

  • TUN-4312 Fixed multi-select combos in the queries are not showing an selections when collapsed

  • TUN-4227 Fixed no longer able to manually change and save the lat/ long of an existing POI.

Documentation

  • TUN-4400 Documented the video viewer selection setting

  • TUN-4391 Updated the email plugin documentation to cover the use of multiple email addresses

  • TUN-4388 Recorded a video to create a simple Area Movement Rule

  • TUN-4332 Updates the camera list with latest models

  • TUN-4326 Updates documentation to cover the improved incident detection report

  • TUN-4317 Creates a video to create a detection area and add it to a channel for a radar (using detection area option on radial menu)

  • TUN-4316 Updated video for restoring a config from a different site

Related Information

Safety is everything.