AdvanceGuard® V4.3 Release Notes

Introduction

These release notes cover AdvanceGuard V4.3 and above.

Contents



Version 4.3.0 Build 342 - 18 September 2019

Tracker 4.0.1.109 Release Notes

New Features

  • Added ICD-001 external trigger command

  • TUN-3127 - Added sorting options to Area selections based on name

  • TUN-3122 - Make sure that rule editor can be opened by double clicking VM in Where Used list

Fixes

  • Fixed missing Rule User Id on ICD-001

  • Fixed silence button on alarms not working correctly

  • TUN-3102 - Scaling is not working as expected when when we lose connection to the Service

  • Fixed user settings requiring a restart of the management server to apply correctly

Version 4.3.0 Build 337 - 13 September 2019

Tracker 4.0.1.109 Release Notes

New Features

  • TUN-2933 - Added support for analogue PelcoD cameras using AXIS range of encoders

  • TUN-2959 - Added support for a manual camera lock using the PPI right mouse button context menu. This allows an indefinite dwell on the selected position assuming there are no automatic targets to track

  • TUN-2983 - Added the ability to add custom area disarm / arm timeouts via the system settings

  • TUN-2990 - Added a permission rule action option. This allows user permissions to be changed, typically based on a schedule, so they can have different capabilities at different times of the day

  • TUN-2998 - Added a new ATI check rule node. This allows rules to check to see where a track was established along with all the other supported checks

  • TUN-3112 - Added a new Broken Rule check node. This allows a rule to check if a track has broken any other rules prior to it being checked. Note that rule order is important when using this check

  • TUN-2793 - Added an alarm warning notification if the Use Floor option is enabled without a captured floor file being present

  • TUN-2992 - Added the ability to copy and paste rule nodes within the rule editor (for the same rule)

  • Added plugin support for one or more Echodyne radar [Experimental]

    • Added the new drone classification

    • Added altitude readings to track sightings and track history dialog

    • Added ability for tracks classified as drones to bypass the camera height map adjustments

  • TUN-2955 - Added the ability to configure the UI streaming window to be hidden whilst streaming is active. This enables additional PPI windows to be configured specifically for streaming and then hidden so the operator can not adjust them

  • TUN-3094 - Added the option to show target speed along with Id on all live track labels

  • TUN-3095 - Added the ability to set a zoom factor per camera for different classifications. This would, for example, enable the system to back off the zoom when tracking large targets such as planes or large vehicles.

  • TUN-3060 - Added ability for operators to tag tracks with a custom description and severity. This is done using a preset menu to make it fast and seamless. Options can be configured via system settings. In addition track histories can be searched using this tag

  • TUN-3090 - Added new optional latitude and longitude mouse position display in PPI. This is disabled by default but can be enabled in the user settings.

Improvements

  • TUN-2941 - Significant improvement to the Configuration Tree to restrict certain folders to specific types of configuration objects and to prevent unwanted objects being moved to system folders

  • TUN-2942 - Added visual filtering to the Configuration Tree so only visual items are displayed in the tree when not in configuration mode

  • Improved the New object list by filtering content based on selected Configuration Tree folder

  • TUN-2977 - Added a configurable hard limit for acknowledged alarms list so it does not grow indefinitely

  • TUN-2984 - Moved the option to require an arm / disarm timeout dialog when changing an area state from the user settings to each area. This allows for highly configurable setup where the operator can use this feature only on selected alarm zones

  • TUN-2988 - Improved UI notifications and logging for rule action nodes which are responsible for making automatic system changes

  • TUN-3002 - Improved the auto-creation of alarm exclusion zone to allow it to be drawn around one or more tracks. So if several tracks are selected from the track query results the new area will be drawn to cover all points from the selected tracks

  • TUN-3006 - Improved translations to include more system level messages

  • TUN-3075 - Added the track life duration to the track history dialog

  • TUN-3078 - Improved the track history label positioning to help align it with its track path

  • TUN-3079 - Added an interactive transparency to the track history labels to ensure they are only fully opaque when selected. This makes them less obtrusive when there are lots on the PPI

  • TUN-3109 - Added radar User Id to the radar group read-only panel

  • TUN-3111 - Added the ability to search for alarms using the alarm Id

  • TUN-3101 - Added Locate button to the track history dialog

  • TUN-3103 - Added an absolute movement control to Kelder to allow the camera to be moved more easily during camera calibrations

  • TUN-3076 - Improved alarm location animation to ensure it differs from other alarm animations - this avoids confusion when locating alarms whilst other alarms are active

  • Added the ability to search for tracks by numeric track Id

  • Updated the zoom calibration on the Bosch MIC 7000 series. The new calibration provides a much better automatic zoom

  • Prevented the user from exiting configuration mode whilst an object is being edited

  • Fixed an issue where the folder enable / disable control was not disabling all sub-items correctly

  • Added ability to export security alarms from the search result list. Added Alarm Id to alarm export CSV

  • Changed maximum length of the radar name from 10 to 20 characters

  • Changed date/time to local for alarm and track CSV exports

  • Added the RuleId to alarms in ICD-001

  • Changed the default user permissions so that users cannot adjust map / image opacity

Fixes

  • TUN-3000 - Fixed an issue where tracks were not being displayed accurately on their reported position within the UI

  • TUN-3001 - Fixed issue where Highways Log query was not showing a total in the tab header

  • TUN-3003 - Fixed issue where the Plane track icon was not rotating with direction

  • TUN-3004 - Fixed issue where Chinese characters were not being processed correctly by the CSV export

  • TUN-3049 - Fixed an issue that required users to restart the UI after making a change to the radar data distribution settings

  • TUN-3069 - Fixed Z order on track history labels to ensure they remain on top

  • TUN-3077 - Fixed the dynamic history line complexity logic so history track paths are shown with the appropriate level of complexity

  • TUN-3110 - Fixed a display issue where radar were not centrally aligned within their Track Engine container

  • TUN-3119 - Fixed a display issue where track classification was being displayed correctly when using a classification override rule

  • TUN-3129 - Fixed an issue where the radar mini-control is not always being displayed when the radar is being edited

  • TUN-3104 - Fixed the rule wizards so that they generate an Id correctly and work as expected

  • Fixed an issue with Axis camera models where the selected model did not match the underlying driver

  • Fixed latch mode for the Rule Layer action node so it operates as expected

  • Numerous UI optimisations and minor fixes to improve the user experience

Version 4.3.0 Build 310 - 31 July 2019

Tracker 4.0.1.92 Release Notes

Fixes

  • Fixed problem with all 360 Vision Cameras being Onvif and not Vision 360 protocol

Version 4.3.0 Build 309 - 30 July 2019

Tracker 4.0.1.92 Release Notes

Fixes

  • Fixed issue where a bad backup file would cause all backup files to not load

  • Fixed issue when database goes away causing the MS to crash

Version 4.3.0 Build 308 - 24 July 2019

Tracker 4.0.1.92 Release Notes

Improvements

  • Improved loading of large background images on slower computers

Version 4.3.0 Build 305 - 08 July 2019

Tracker 4.0.1.92 Release Notes

Fixes

  • Fixed error when importing background images

  • Fixed missing null check to User Settings that could cause the UI to not load

Version 4.3.0 Build 303 - 08 July 2019

Fixes

  • TUN-2938 - Added missing title text for Database Restore dialog

  • Added icon to Test Email button

  • TUN-2939 - Only show retention days if the backup being restored contains alarms

  • Fixed UI Stream setting not being restored when UI restarts

  • TUN-2958 - Fixed creation of alarm exclusion areas from track results not immediately populating area list with new area and restricted to administrator

  • Fixed Management Server name bug and fixed up issue with Radar Data toggle losing status

  • Fixed up Radar Data toggle button so it responds to bad radar health and also a Track Engine being shut down

  • Fixed Coasts Ratio calculation to not include Provisional sightings

  • Fixed creating tracks from track history did not create correct number of points

  • Fixed main windows missing minimise and maximise buttons on first launch with an empty configuration

  • TUN-2931 - Fixed rule editor not working on multi dpi systems

  • TUN-2963 - Fixed missing trigger id on External Trigger Check rule node

  • TUN-2529 - Fix breach line to rotate correctly around centre point

  • Fixed track correlation not handling certain edge cases

  • TUN-2974 - Fixed slow down when creating tracker parameters and having a lot of radars

  • Fixed pending acknowledge list not clearing colour in tab when list empty

  • Fixed memory leak with alarm lists

New Features

  • Added Chinese translation files and added register methods for all relevant projects

  • TUN-2966 - Added language selection to installer

  • TUN-2951 - Added ability to edit alarm acknowledge option list

  • Added static sensor rule wizard

  • TUN-2962 - Added a Latch and Input option to rule Profile Action node

  • TUN-2960 - Added ability to copy a rule schedules

  • TUN-2904 - Added SMS integration plugin

  • TUN-2919 - Added Security E-Mail plugin

  • TUN-2978 - Added in optional colour picker for disarmed areas if disarmed pattern not chosen

  • TUN-2981 - Added user option to disable area timeout option

  • TUN-2957 - Added sytem and audit log playback queries

  • TUN-2975 - Implement user permission to allow toggle of layer

Improvements

  • Removed configuration tab and replaced with configuration mode control user can press Ctrl+Alt+C to toggle mode

  • TUN-2940 - Improved behavior for list views to ensure select all selects all items even if not displayed

  • TUN-2927 - Ensured acknowledgement of alarms is now supported fully

  • Improved the alarm history dialog to show acknowledgement details if any

  • TUN-2529 - Added rotation logic and handling for Carriageways

  • TUN-2529 - Change default rotation delta to 1 degree from 5 degrees

  • TUN-2925 - Updated camera wizard to filter cameras by manufacturer

  • TUN-2918 - Ensure that when the first pending acknowledge alarm is selected when the tab is selected or if selected and the first alarm appears

  • TUN-2956 - Removed Auto Silence as feature is no longer required due to changes to Auto Acknowledge behaviour

  • Allow 0.01 as the smallest change in angle on the TIlt and Pan offset controls

  • TUN-2964 - Added radar name and user Id to text log output when the TrackerManager is starting a local tracker or connecting to onboard

  • TUN-2965 - Ensure the Management Server is using translations for Notifications, Entity Audits and System Logs

  • TUN-2967 - Added command line option to change user interface language

  • TUN-2944 - Added health status indicator to Topology tabs

  • TUN-2952 - Added a confirmation dialog when a user clicks the user settings reset button

  • Ensured that when radar model changes the contour map is deleted

  • Changed to using Ctrl+Alt+P to output performance counters in services running in console mode

  • Ensure playback tracks are created centred around the screen with three points

  • Ensured only adminstrators can create playback tracks from the track history

  • Ensured there is consistent behaviour with configuration mode on the topology view

  • TUN-2930 - Take into account rotation of display when rendering security track marker

  • TUN-2156 - Added simple method to simplify track history line points

  • TUN-2980 - Updated folder rule action to respect area disarm mode

  • TUN-2991 - Updated folder rule action to use base enable/disable input and latch functionality


Related Information

Safety is everything.