Camera Integration - ClearWay™ Mobile Client

Owned by Charlotte Dakin-Norris
Last updated: Sept 23, 2024
2 min read

Introduction

This page discusses the main aspects of Camera Integration within the ClearWay™ Mobile Client.

The behaviour of the ClearWay™ Mobile Client will reflect the configuration of the ClearWay™ application. For example; a user logged into the Mobile Client will have the same permissions as in the main application. Unlike the main Windows application, these permissions cannot be set using the Mobile Client, they must be configured in the main client.

Contents

Camera Integration

For the camera integration to work in the ClearWay™ Mobile Client, you will need to have configured camera/s in the ClearWay™ application; please refer to: https://navtechradar.atlassian.net/wiki/x/A4DlHQ. You will also need to update the Camera Stream URL and Override Camera Stream URL settings: Carriageways | Section Settings.

The section on the right is information about the currently selected section in the schematic. If a URL has been allocated or manually entered, the camera button will be green and you can click it to open a new tab using the specified URL:

image-20240923-112827.png

The allocation is done by checking which camera is looking at a specific section and if there are multiple it will pick the closest.

If a URL is not specified, the camera button will be greyed out:

image-20240923-112718.png

 

 

 

Related Information

Safety is everything.