Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Introduction

Contents

Adding a Radar 

  1. To add a radar, click on the Choose Radar drop-down and select the model you wish to use:

  2. When you have chosen the model, you will be able to select the Add Radar button:

  3. The Name Radar dialogue will open:

  4. Choose a name that is meaningful for the situation and click the Create button:

  5. The radar will be created.  On the map screen, you will see the radar appear centred on the home position:

  6. There will also be the radar details in the Properties dialogue.

Radar Properties

Each radar placed on the map has many properties that can be edited:

Name: The name you have chosen for the radar.

Font Size: This controls the size of the text that is displayed when labels are shown. The drop-down allows for a font size between 10 and 20 points, with 20 being the default size.

Conservative: The Conservative option uses a lower range for person and vehicle detection and is not selected by default. This is a useful feature to enable if the radar will be placed in a location with obstructions such as trees and long grass.

Vehicle Detection: This option will detect vehicles as well as people. If disabled it will only detect people.

Hidden: This option will completely hide the radar on the map and will also not be used when 'tracing' the detection.

Radar Colour: This option displays a colour picker that will allow you to choose the colour of the radar area. By default it is blue.

Display Label: This controls if the label is displayed on the map. By default it is selected.

Model: This is the only field that is not editable, and displays which model was selected when the radar was created.

Editing a Radar

Once a radar has been created, it can be edited.

To do this:

  1. Click the Edit button:

  2. Select the radar either by selecting it from the Properties list:

  3. Or by clicking on the radar itself:

If the radar has been hidden you will have to select it from the Properties list.

Deleting a Radar

  1. To delete a radar, you first must be in edit mode, then select the radar you wish to delete:

  2. Once selected, press the Delete button:

  3. A dialog will appear:

  4. Select Yes to delete the radar from the scenario.  If you choose No, you will be returned to the editor.

  5. Click Save to save the changes:

Related Information

  • No labels