Introduction

This page covers the Auto-Section wizard. Each carriageway is divided in sections for the purposes of AID detection and reporting, as well as equal carriageway segment allocation to individual radar. It also allows you to import the section numbers and desired length from a file.

Contents

Configuring Auto-Section

The Auto-Section wizard can be found by:

1. Under the Config tab, select the carriageway you wish to auto-section.

2. Go to the Edit button, select, and then open up the Actions drop-down.
   
   

   Open

   

    

3. Select Auto-Section.
   
   

   Open

   

    

4. The wizard will present you with four options:

5. Import from File: This will allow you to import section distances from a file. This option is covered here: Auto-Section | Importing Section Lengths from File.
   Section ID: The number ID of the initial section (either at the start or the end of the carriageway), from which the rest will follow on, increasing numerically. By default, this will be 1. e.g. 1, 2, 3, 4 etc.

   Section Length: The length you wish all the sections to be configured to. By default, this will be 100m.

   Start from (Start/End): Whether the initial section, from which all other sections shall increase numerically, is at the beginning or the end of the carriageway. By selecting Start, the section IDs will increase numerically from left to right, whereas selecting End means they will increase numerically from right to left.

6. Select the desired variables and click Apply.

In this example, the upper carriageway has been configured to Start from: End with a Section ID of 1, in order for the section IDs of each carriageway to run parallel to one another:

Importing Section Lengths from File

To import section distances from file, a CSV file should be prepared with three data columns. The first should contain the section number (integer), the second the section name (string) and the third column should contain the section distance (decimal).

When you select the Import from File checkbox the variables will change:

Renumber Only: This field is disabled as the .csv files contains the new numbers.

Start from: There are two options; Start or End. This impacts from which end of the carriageway the section numbers will start.

Video

This video demonstrates how to import section lengths from a .csv file:

Related Information