Introduction

This page covers the ClearWay™ Incident Report.

Contents

Incident Report

The Incident Report lists details about an incident on a carriageway and includes a map highlighting it.

Open

Incident Summary

Incident Id: Unique alphanumeric identification assigned to each Incident.

Incident Description: The type and location of the Incident.

Incident Start / Finished: The start and finish time of the Incident.

Incident Duration: The duration of the Incident..

Alarm Acknowledgment: When the alarm was manually acknowledged by a user.

Incident Acknowledgement Status: This is the Status of the Incident Acknowledgement as selected by the operator; e.g. Unknown, Intruder, Friend etc.

Incident Acknowledgement Notes: This will display any Incident Acknowledgement Notes that have been added by an operator.

Incident Map

The map will display the track of the target. It has PPI Controls to help navigate around the map display, including pan, zoom and return to the origin.

Incident Thumbnail

There is an option in the Alarm Node in the rule editor to capture an alarm snapshot: Rule Actions | Alarm. If this is enabled and the camera successfully captures a screenshot of the incident, then this will be displayed here.

Targets

ID: Unique alphanumeric identification assigned to each Target.

Classification: The classification model of the Target, e,g. Person, Small Vehicle etc.

Tag: Tags can be attached to live tracks by an operator which can then aid identifying and analysing tracks during playback at a later date.

Severity: The severity of the intrusion; e.g. unknown, friend warning or threat,

Duration: The length of time the Target was monitored.

Entry: The Area the Target entered.

Exit: The Area the Target exited.

Time: The date and time the Target was spotted.

Options: The operator can Show or Hide target labels on the Incident Map.

Print Report: This is the option to print the report.

Cancel: Select Cancel to close the Incident Report.

If the user has configured the Incident Report to display their own logo (see: System Settings | General), then the default, Navtech Radar logo will be replaced with the user’s logo:

Open

Related Information