Introduction

The Count Check looks for a number of targets inside the specified area within the allocated time frame. This example is looking for more than 3 targets inside the Orchard area within 20 seconds. If these conditions are met then an alarm will be raised.

This check can be used to detect the build up of crowds or detect individual targets which are loitering in specific locations.

Contents

Configuration

Open

Nodes

Inputs

Track Sighting Input Rule Inputs | Track Sighting Input

Time Input Rule Inputs | Time Input

Checks

Count Check Rule Checks | Count Check

Open

Actions

Alarm Rule Actions | Alarm

Camera Rule Actions | Camera

PPI Example

The are three targets in the Count Check area, with another approaching:

As soon as the forth target enters the area the alarm is triggered:

Video

The following video demonstrates how to configure a Count Rule by adapting a Custom Rule Wizard:

Related Information