Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 46 Next »

Introduction

These release notes cover ClearWay™ V4.12 and above. The V4.12.x release marks a significant update to the underlying framework bringing it up to date with the latest Microsoft technologies and contains a number of significant improvements to support new features such as the latest version of Situational Awareness (SA2).

Contents



Version 4.12.4 Build 1162 - 18 June 2024

Fixes

  • Fixed issue where test alarms where not being shown in the ICD-001 output.

Version 4.12.4 Build 1158 - 29 May 2024

Orca Tracker 4.12.0.329 Release Notes - NavOS 32-Bit Tracker 4.12.0.349 Release Notes -NavOS 64-Bit Tracker 4.12.0.349 Release Notes

Improvements

  • TUN-6435 - Improved ICD-001 failure reporting to alarm on each individual connection.

  • TUN-6501 - Implemented track correlator option to maintain tracks.

  • TUN-6659 - Implemented new tracker health alarm.

  • TUN-6618 - Included legacy option for Modbus registers.

Fixes

  • TUN-6523 - Fixed NZTA plugin failing to update csv file after updating size classifications.

  • TUN-6552 - Fixed an issue with range and bearing failing to update when a radar is being edited.

  • TUN-6553 - Fixed issue where backup config was being generated on secondary Management Server system.

  • TUN-6584 - Fixed issue with Traffic analysis replay not saving decimal values.

  • TUN-6602 - Fixed anonymous login feature for ICD-007.

  • TUN-6654 - Fixed the licensing tool to apply the correct version number to the license.

  • TUN-6662 - Fixed styling issue with web viewer that displayed save and cancel options incorrectly.

  • TUN-6701 - Fixed issue where a secondary Management Server would shut down if it lost connection to the database.

  • TUN-6635 - Fixed mongo log rotate task.

  • TUN-6761 - Fixed issue causing health monitoring in plug ins to be reported incorrectly.

Version 4.12.4 Build 1112 - 26 February 2024

Orca Tracker 4.12.0.329 Release Notes - NavOS 32-Bit Tracker 4.12.0.329 Release Notes - NavOS 64-Bit Tracker 4.12.0.329 Release Notes

Improvements

  • TUN-6560 - Redesigned the Track Engine architecture to improve resource and thread contention on a heavily loaded system. This resolves the issue where the TE disconnects from the MS due to thread starvation when running multiple trackers locally. This issue is less likely to be seen on systems using OBTs, however this change may reduce some of the network latency which results in spurious time sync warnings.

  • TUN 6560 - Increased the messaging timeout to ensure that any unusual spikes in resource use do not cause a communication disconnection.

Fixes

  • TUN-6556 - Fixed an issue when installing a Management Server without any other services which resulted in it being unable to start due to the data folder being unavailable.

Note that this version includes the latest version of Mongo so when upgrading from earlier than 4.12.4.1108 you must first upgrade in sequence from 4.12.1.1099 → 4.12.4.1108.

Version 4.12.4 Build 1108 - 07 February 2024

Orca Tracker 4.12.0.329 Release Notes - NavOS 32-Bit Tracker 4.12.0.329 Release Notes - NavOS 64-Bit Tracker 4.12.0.329 Release Notes

Improvements

  • TUN-6529 - Updated MongoDb to version 7.0. This version pushes the end of support date back to August 2026.

To upgrade to this version you must first update to v4.12.3.1105 and start the system at least once before installing this release. Full details can be found in the ClearWay™ Upgrade Instructions.

Version 4.12.3 Build 1105 - 06 February 2024

Orca Tracker 4.12.0.329 Release Notes - NavOS 32-Bit Tracker 4.12.0.329 Release Notes - NavOS 64-Bit Tracker 4.12.0.329 Release Notes

Improvements

  • TUN-6482 - Updated MongoDb to version 6.0. This version pushes the end of support date back to July 2025.

  • TUN-6482 - Improved the Log Rotate install script to avoid raising errors when trying to remove a scheduled task that does not exist.

To upgrade to this version you must first update to v4.12.2.1101 and start the system at least once before installing this release. Full details can be found in the ClearWay™ Upgrade Instructions.

Please note that in this release of MongoDb, the shell application has been renamed from mongo.exe to mongosh.exe.

Version 4.12.2 Build 1101 - 05 February 2024

Orca Tracker 4.12.0.329 Release Notes - NavOS 32-Bit Tracker 4.12.0.329 Release Notes - NavOS 64-Bit Tracker 4.12.0.329 Release Notes

Improvements

  • TUN-6482 - Updated MongoDb to version 5.0. This version pushes the end of support date back to October 2024.

Fixes

  • Fixed a minor issue with the SSH connection for fetching logs on Orca radar.

To upgrade to this version you must first update to v4.12.1.1099 and start the system at least once before installing this release. Full details can be found in the ClearWay™ Upgrade Instructions.

Version 4.12.1 Build 1099 - 01 February 2024

Orca Tracker 4.12.0.329 Release Notes - NavOS 32-Bit Tracker 4.12.0.329 Release Notes - NavOS 64-Bit Tracker 4.12.0.329 Release Notes

New Features

  • TUN-6388 - Added new health check that monitors track output from each radar to identify any that have dropped to zero whilst other radar continue to generate tracks. Details on the feature can be found here https://navtechradar.atlassian.net/wiki/spaces/TUN/pages/783745334/Track+Engine+Configuration#ClearWay%E2%84%A2-Tracking-Performance-Health.

  • TUN-6397 - Added new OpenWeather plugin that checks the online service to analyse the weather state from the nearest weather station to the configured ClearWay™ site. The plugin supports the ability to change tracking performance profiles in response to changes in weather state. Document can be found here OpenWeather Map Plugin.

  • TUN-6480 - MongoDb database authentication is now supported. This allows database access to be secured with a username and password. Both the database and ClearWay™ must be configured correctly to support authentication. Full instructions on implementing this feature can be found here Database Authentication. Authentication is not enabled by default, so this version will behave like all previous versions.

  • TUN-6485 - The underlying .NET framework has been updated to the latest .NET 8 release. This platform offers both security and performance enhancements. This new framework is an evolution of .NET 6 which was introduced in version 4.12. There are no changes to the pre-requisites because these are all included with the normal installation / upgrade.

  • TUN-6161 - The SightLogix 533-030 camera has now been integrated. Currently this is based on experimental camera firmware so is not production ready.

Improvements

  • TUN-6377 - Improved exception logging for the tracker upgrade manager to include the IP address of the device being upgraded.

  • TUN-6239 - Improved manual radar log capture UI notification to indicate if a capture was unsuccessful on any given radar.

  • TUN-6383 - The Web Client UI now supports a splitter to enable users to adjust the relative space allocated to both the schematic and the bottom information panel.

  • TUN-6422 - When using the OpenWeather service plugin, the current weather state, wind speed, temperature and weather station location will be displayed in the plugin configuration panel.

  • TUN-6423 - When using a weather service plugin, there is now a user option available to display the current weather state and temperature in the application’s main title bar.

  • TUN-6445 - Improved the alarm categories so the tracker health performance alarm message is more meaningful.

  • TUN-6447 - Security has been improved on the Web Client UI to ensure it can’t be opened in an iFrame. This prevents scenarios where the client can be inserted into another application / site.

  • TUN-6476 - Security has been improved on the Web Client web server and on the application inter-process communications. All certificates have been updated to use the latest, more secure cryptographic hashing algorithms, Where available all connections will use TLS1.3 but no lower than TLS1.2.

  • TUN-6478 - Security has been improved on the Web Client UI to prevent the browser remembering previous usernames in the login dialog. This will forces users to always manually enter their username and password.

  • TUN-6480 - Updated MongoDb to version 4.4.28. This version supports improvements to replication including a more efficient synchronisation method and a recovery mechanism that allows initial synchronisations to resume in the event of a minor network interruption.

  • TUN-6485 - Security has been improved by updating all dependent packages which at the point of release has resolved all known vulnerabilities in these dependencies. This has also brought all the packages inline with the latest .NET 8 technology stack.

Fixes

  • TUN-6396 - Fixed an issue with the tracking area list in the channel which was allowing multiple entries to be selected and removed which resulted in an exception. The logic has been changed to only allow a single entry to be removed at a time.

  • TUN-6411 - Fixed an issue where an incorrectly formatted CSV file caused the radar import feature to lock up.

  • TUN-6464 - Fixed issue manipulating lane nodes when stacking lanes on top of one another on the carriageway. The top node can now always be manipulated.

  • TUN-6509 - Fixed the Track Correlation query to ensure it works with both lost and stale tracks. This overcomes issues when track correlation is being used.

  • Fixed the log rotate script which is installed as a Windows Scheduler Task on all database servers. This now works as expected and also supports database authentication. Due to complications with updating the previous script, this updated version will install as a new task and the old task will be removed. Please refer to the Database Authentication for further information on how to implement authorisation with this scheduled task.

  • Fixed the process checker for Helvellyn - this now correctly enforces the restriction that only a single UI can be run on the same physical system even if multiple users are logged in concurrently.

  • This version has been developed using the .NET 8 technology stack which is now a mandatory pre-requisite for the entire software suite.

  • This version includes a later version of the MongoDb server, however it becomes EOL February 2024. Further releases will be made available imminently with newer database servers that are all currently supported. Details for upgrading will be included in the release notes for these new versions.

  • Implementing MongoDb authentication is a manual process but supported with the Witness Utility to make the process easier. Full documentation on the steps required to implement authorisation can be found here Database Authentication.

Version 4.4.x of MongoDb requires the Visual Studio 2019 x64 C++ redistributable. The recommended pre-requisites for ClearWay™ 4.11 and newer included the Visual Studio 2015-2019 x64 combined redistributable, so existing installations should already have the correct support. However, we recommend that this is checked before installing this version. Note that later versions of the MongoDb server will require the Visual Studio 2022 redistributable so the recommended package is now Visual Studio 2015-2022 x64. This package will support all versions of the database for all releases of ClearWay™ version 4.x and is now the recommended pre-requisites Software Prerequisites.

Version 4.12.0 Build 1084 - 11 January 2024

Orca Tracker 4.12.0.329 Release Notes - NavOS 32-Bit Tracker 4.12.0.329 Release Notes - NavOS 64-Bit Tracker 4.12.0.329 Release Notes

Improvements

  • TUN-6460 - The new GlobalSign code signing root certificate is now included in the installer and is automatically added to the certificate store during setup. This resolves the issue on systems which have no internet connection and cannot not check the root certificate online.

If you need to manually install the root certificate to ensure 4.12.0.1073 works on a system without an internet connection then please refer to the instructions here.

Version 4.12.0 Build 1073 - 20 November 2023

Orca Tracker 4.12.0.324 Release Notes - NavOS 32-Bit Tracker 4.12.0.324 Release Notes - NavOS 64-Bit Tracker 4.12.0.324 Release Notes

New Features

  • TUN-6303 - Added a new correlated track query option which will attempt to find all track data which the system considers to be the same target. This feature allows the user to rebuild the complete history of a target's movement across the site even if the track was dropped and re-acquired several times.

  • TUN-6372 - New ICD-008 plugin for integration with TVK’s TDIS data collection system. https://navtechradar.atlassian.net/l/cp/ERfsN5Ag

Improvements

  • TUN-5876 - Added a password complexity check at login to force users to change passwords if their group has been changed and with it their required password complexity.

  • TUN-6101 - Changed the default network cache time to 500ms for the VLC video viewer.

  • TUN-6196 - The internal queues which are used extensively for handling real-time data have been completely revamped to improve performance and ensure they can never shut down by accident. In addition, logging has been added to all queues so should any issues occur, they are captured.

  • TUN-6230 - Improved the database logging to provide better information on issues relating to a replicated database setup.

  • TUN-6304 - Added the KTS model to the radar model list.

  • TUN-6305 - Improved the Tracker Manager (TE) so it provides better logging during start up and stopping.

  • TUN-6360 - Added a rotation display label to the PPI windows which shows when the display is being rotated, In addition, added a shortcut key to revert the rotation of any window to zero (Ctrl-Shift-Down Arrow).

Fixes

  • TUN-6043 - Fixed the issue where pinned camera viewers were rotating with the PPI.

  • TUN-6060 - Fixed an issue where tooltips were allocated to the wrong fields in the camera group settings.

  • TUN-6109 - Fixed an issue where the System Mode displayed in the main window title bar was getting out of sync with the active mode after a UI disconnect / reconnect to the Management Server.

  • TUN-6204 - Fixed the user track visibility settings so the Breaking Rule option works as expected.

  • TUN-6232 - Fixed the issue with the height map where the grid lines where not showing.

  • TUN-6278 - Fixed the playback track logic so that Mark as Lost works as expected.

  • TUN-6279 - Fixed the issue where users could not log back into the web UI after their password had been changed.

  • TUN-6287 - Fixed an issue with the radar bulk edit feature which was preventing the SD Factor from being changed.

  • TUN-6288 - Fixed the issue which was preventing a camera returning home or being re-tasked for automatic following the completion of a manual latch.

  • TUN-6289 - Fixed the issue which was preventing the floor capture from multiple radar using the radar bulk edit form.

  • TUN-6293 - Fixed an issue that allowed certain schedules to be created without entering all the required data, such as the camera selection for the White Light schedule.

  • TUN-6295 - Fixed an issue which allowed schedules to be manually triggered with an active edit lock in place.

  • TUN-6297 - Fixed an issue where the radar bulk edit feature was not honouring the edit lock and allowed duplicate concurrent actions such as floor captures.

  • TUN-6299 - Fixed an issue with Image Server where not all resources were being disposed correctly on shut down.

  • TUN-6353 - Fixed an issue with the radar bulk edit feature which was always allowing the Slow Decay to be edited even when not selected

  • TUN-6371 - Fixed the issue where the PPI rotation was not being saved and restored after a restart of the UI.

Version 4.12.0 Build 1048 - 05 September 2023

Orca Tracker 4.12.0.324 Release Notes - NavOS 32-Bit Tracker 4.12.0.324 Release Notes - NavOS 64-Bit Tracker 4.12.0.324 Release Notes

New Features

  • TUN-5846 - New Suppress New feature for rules which allows the rule engine to maintain existing alarms which are raised before the section goes into queue.

  • TUN-5961 - Added a new track query feature that displays a summary of the track processed by TA.

  • TUN-5962 - Added a new TA summary display that allows the user to dynamically recalculate TA results based on configurable TA classes.

  • TUN-5992 - Added the option to process TA in areas - this replaces the existing logic which only allowed areas to reduce the TA area within the target section.

  • TUN-5995 - Added the ability to copy a TA configuration to one or more sections.

  • TUN-6160 - Integrated the Videotec NXPTZ2V8XR camera.

Improvements

  • TUN-5510 - Added the ability to raise system alarms in the event that the Track Engine encounters a high number of disconnects from a tracker within a specified time frame.

  • TUN-5602 - A new Windows Task Scheduler script is added by the installer on all database servers. This script will force a log rotate on the database every 24 hours.

  • TUN-5876 - Added a password complexity check at login to force users to change passwords if their group has been changed and with it their required password complexity.

  • TUN-5959 - Added the ability to select specific lanes for TA.

  • TUN-5960 - Added ability to record and identify tracks that have been processed by TA.

  • TUN-5970 - Mobile Client (SA2) now honours the Allow Alarm Clear permission setting.

  • TUN-5983 - Added the FPGA version number to the radar summary list and associated export data.

  • TUN-5994 - Improved TA configuration editing to support in-place editing in place of the pop-up dialog.

  • TUN-5998 - Added support for zero width lanes across all of the carriageway.

  • TUN-6037 - Enabled the ability to use both minimum and average track sighting size for TA processing. Based on historic data analysis, minimum size is now the default.

  • TUN-6039 - Improved the TA minimum sighting logic to ensure all sightings are included in the size aggregate measurement regardless of the minimum sighting setting.

  • TUN-6063 - Improved area detection for tracks to avoid any area processing on disabled areas. This primarily impacts areas used for queue and alarm suppression.

  • TUN-6096 - Added ability to select the aggregate method for size in the TA configuration. Users can choose between minimum or average. Average has been maintained for backward compatibility, however based on recent testing, minimum appears to give more consistent results.

  • TUN-6101 - Changed the default network cache time to 500ms for the VLC video viewer.

  • TUN-6172 - False Alarm filters have been improved for direction and time filtering to ensure scores are based on how close the track being checked is to the most common FA groupings.

Fixes

  • TUN-5953 - Fixed the tooltip on the Play Video button.

  • TUN-6010 - Fixed the carriageway statistics graph not showing data lines correctly.

  • TUN-6013 - Fixed invert mode for carriageway rules nearby queues.

  • TUN-6060 - Fixed incorrect tooltips being applied to the wrong fields in the Camera Group form.

  • TUN-6067 - Fixed TA output values for ICD-001, NTZA & OPC plugins to reflect the selected size option (minimum or average).

  • TUN-6126 - Fixed Suppress New feature so supports all rule types including track-based rules.

  • TUN-6176 - Fixed colour picker on the POI bulk edit form.

  • TUN-6180 - Fixed an unhandled exception when applying a new licence after creating one more carriageways.

  • TUN-6181 - Fixed missing alarm filters on the Alarm Dashboard.

  • TUN-6273 - Prevented POI Groups being created with an empty name.

  • Version 4.12 is developed using the .NET 6 development stack which is now a mandatory pre-requisite for the entire software suite.

  • The applications now support cross-platform deployment on Windows and Linux, however none of the applications have been tested on Linux and currently there is no deployment mechanism other than the Windows installer. Full Linux support for the back-end services is planned for future releases.

  • Key underlying technology has also been upgraded or replaced to ensure the platform can support new features such as the latest Mobile Client. Despite extensive testing, this increases the risk when upgrading from older versions. It is recommended that existing installations are upgraded to the latest version of 4.11 before upgrading to 4.12.

  • Due to the changes in the FA filters for direction change and times we recommend that the FA models are re-created after upgrade. Be aware that the real time FA scores may give slightly different results based on improved models.

  • Following the change to honour the enabled state of areas used for queue and alarm suppression, all areas should be checked to ensure the Enabled setting matches the desired state.

  • The TA update will change the default aggregate size measurement to the minimum for new installations but will retain the use of average size for upgrades.

  • This version includes a new code signing certificate and therefore requires a new root certificate. This is handled automatically on systems with an internet connection but the root certificate must be installed manually on systems without internet connectivity. Instructions can be found here.


Related Information

  • No labels