Introduction

This section covers assigning an Image Server Camera Config to an Image Server to ensure it connects and can read the image stream.

Contents

Image Server Topology

After adding an Image Server Camera Config, you must assign it to an Image Server in the Camera Topology for the camera config to go live. Please follow these steps:

1. Under the Topology tab, select Image Servers.

2. As when Assigning a Camera; there will be an Unassigned Items panel with detected Camera Configs waiting to be assigned to an Image Server. The Image Server functions as management software, similar to a Management Server.

3. Check that the Image Server is Healthy before any Camera Configs are assigned to it. A Healthy Image Server will have a green outline. The RAM use in GB and available CPU in Ghz are monitored and displayed as % graphics on the Image Server, with traffic colours to indicate individual health.
   
   

   Open

   

    

4. To assign a camera config, drag it from the Unassigned Items panel into the Image Server.

5. Wait a few moments, and then, if the assignation has been successful, the dot within the camera icon will change from grey to green:
   
   

   Open

   

Related Information