4. Direct Drive Retro-Fit Instructions

Owned by Charlotte Dakin-Norris, created

Last updated: Sept 13, 2021

1 min read

Introduction

This section describes how to fit the Direct Drive retro-fit, and includes a list of all components and tools required for this process.

Contents

Page:

2.9 - Pressure test the enclosure - CTS v2 (Products)
Page:

2.8 - Replace the radome - CTS v2 (Products)
Page:

2.4 - Change the internal battery - CTS v2 (Products)
Page:

2.7 - Fit the top assembly - CTS v2 (Products)
Page:

2.1 - Open the enclosure - CTS v2 (Products)
Page:

3.1 - Preparing and connecting your computer - CTS v2 (Products)
Page:

2.5 - Fit the new drive assembly - CTS v2 (Products)
Page:

3.1.1 - Preparing a computer to link with a radar sensor - CTS v2 (Products)
Page:

2.3 - Remove the drive assembly - CTS v2 (Products)
Page:

2.2 - Remove the upper assembly - CTS v2 (Products)