Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

Introduction

This page covers how to configure a Close Following Rule which includes a video demonstrating the process. Typically, this rule can be used to alert you if a vehicle is travelling too closely behind another.

Close following rules are used to analyse each track in turn. Like all other rules, this will raise an alarm for a section, but the rule will look at each track individually to identify if it has broken the rule.

Contents



Configuration

To configure a Close Following Rule:

  1. Select the carriageway and click on the Actions button:

  2. Select Rules:

  3. On the Configure Rules window select New:

  4. Select Close Following from the drop down list:

    image-20240110-144259.png

  5. Then click Create Rule:

    image-20240110-144422.png

  6. The default rule settings can then be adjusted as desired. In the example below the Severity and Alarm Priority were changed:

    image-20240115-084126.png

  7. On the Advanced tab the Classification filters were changed to select the carriageway vehicles:

    image-20240115-084345.png

  8. On the Sections tab add the sections where you want to detect and enforce the close following rule - for example, a section which has a camera configured to capture the rule being broken, and then click Save:

    image-20240115-084954.png

  9. The new rule is now displayed in the Configure Rules window:

    image-20240115-085206.png

Video

The following video demonstrates how to configure a Close Following Rule and what happens when the rule is broken:

Close Following Rule.mp4

Related Information

  • No labels