Note that some of the links in the content below navigate away from the Industrial Automation space within the documentation system. Bookmark this link if you need an easy route to navigate back to this space.
Introduction
This page covers how to log in and out of Vertex.
Contents
User Login to Vertex
Once you have accessed the radar interface as described here: https://navtechradar.atlassian.net/wiki/spaces/PROD/pages/29294899/Vertex+User+Guide#Accessing-the-Radar-Interface, you will be able to login to the system:
Click the Login button highlighted in pink below:
This will open the Login dialogue:
Enter your Name and Password and click Login (see the table below for the default password):
You will then be logged into the system, and the main Status screen will be displayed:
The Vertex pages have been configured to show tooltips to aid the operator. To enable these simply hover your mouse over a field that is editable or simply press Ctrl+Q:
Default Password
Radar firmware version 2.x | Radar Firmware version 3.x |
|---|---|
Username: user (all lower case) | Username: user (all lower case) |
Password: Navtech. (including the capital ‘N’ and the full stop) | Password: Navtech User (including capital ‘N' & 'U’) |
Logout
To logout of Vertex, click the Logout button:
Related Information
-
Vertex User Guide (Products)
-
Firmware Control and Upgrade (Products)
-
Changing the Configuration (Products)
-
Login (Products)
-
Engineer (Products)
-
User - Radar Data (Products)
-
User - Radar Hardware (Products)
-
User - Radar Configuration (Products)
-
Standard User (Products)
-
4. Using the Vertex Interface (Products)