Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

Note that some of the links in the content below navigate away from the Industrial Automation space within the documentation system. Bookmark this link if you need an easy route to navigate back to this space.

Introduction

This page covers how to log in and out of Vertex.

Contents



User Login to Vertex

Once you have accessed the radar interface as described here: https://navtechradar.atlassian.net/wiki/spaces/PROD/pages/29294899/Vertex+User+Guide#Accessing-the-Radar-Interface, you will be able to login to the system:

  1. Click the Login button highlighted in pink below:

  2. This will open the Login dialogue:

  3. Enter your Name and Password and click Login (see the table below for the default password):

  4. You will then be logged into the system, and the main Status screen will be displayed:

  5. The Vertex pages have been configured to show tooltips to aid the operator. To enable these simply hover your mouse over a field that is editable or simply press Ctrl+Q:

    image-20240508-073833.png

    Default Password

Radar firmware version 2.x

Radar Firmware version 3.x

Username: user           (all lower case)

Username: user (all lower case)

Password: Navtech.      (including the capital ‘N’ and the full stop)

Password: Navtech User (including capital ‘N' & 'U’)

Logout

To logout of Vertex, click the Logout button:

image-20240513-074452.png

Related Information

  • No labels