ICD-001 System Profile Command
- Guy Avery (Deactivated)
- Charlotte Dakin-Norris
Introduction
This page deals with the ICD-001 System Profile Command.
Contents
System Profile Change Example
<!--MsgId is the unique id of the message being sent -->
<!--ProfileId is the unique id of the system profile which will become activated -->
<?xml version="1.0" encoding="utf-8"?>
<SystemProfileCommand MsgTimeStamp="2019-02-01T12:14:01+00:00" MsgId="1" ProfileId="1" xmlns="ICDNAV001-SystemProfileCommand">
<Sender SenderId="SenderId1" NetworkAddress="NetworkAddress1" NetworkPort="1" />
</SystemProfileCommand>System Profile Command Element
The system profile command provides the ability to change the active system profile in Witness, based on the provided profile Id. This means profiles can be changed in response to external events, for example, weather sensors can be used to dynamically change the sensitivity of the system as the weather conditions change.
System Profile Command Attributes
Attributes | Description | Type | Notes |
MsgId | Unique message Id | Long | This must be globally unique across all message types |
MsgTimeStamp | Date and time that the message was sent | DateTime | |
ProfileId | Id of the profile which is required to become active | Integer | This is the Id of the system profile that will become the active system profile. It is the UserId of the profile as configured in Witness |
Network Sender Element
Each incoming message can include an optional Sender element. This must include the IP address and port that the client is using to send instructions.
If the Sender element is included the NetworkAddress value will be checked against the subscriber IP address and the command rejected if they do not match.Â
In addition the Sender element is included in the Command Reply. This is a duplicate of the incoming details (i.e. the subscribers IP address and port). The subscriber can use this to verify that they authored the message.
If a message contains the profile Id of the currently active profile then the profile change message will be ignored and no action taken and the message response will indicate a failure.
Related Information
-
ICD-001 Track Filter Command (Witness 4.0)
-
ICD-001 Acknowledge Alarm Command (Witness 4.0)
-
ICD-001 Request Status Command (Witness 4.0)
-
ICD-001 Detection Command (Witness 4.0)
-
ICD-001 Update Entity Command (Witness 4.0)
-
ICD-001 System Profile Command (Witness 4.0)
-
ICD-001 External Trigger Command (Witness 4.0)
-
ICD-001 Command Reply (Witness 4.0)
-
ICD-001 Camera Command (Witness 4.0)
-
ICD-001 Track Command (Witness 4.0)