Introduction

These release notes cover ClearWay™ V4.10 and above.

Contents

Version 4.10.0 Build 897 - 01 October 2021

Orca Tracker 4.10.0.223 Release Notes - NavOS 32-Bit Tracker 4.10.0.223 Release Notes - NavOS 64-Bit Tracker 4.10.0.223 Release Notes

Fixed

• Fixed the incorrect handling of deleted provisional tracks in the tracker

Version 4.10.0 Build 887 - 29 September 2021

Orca Tracker 4.10.0.213 Release Notes - NavOS Tracker 4.10.0.213 Release Notes

Fixed

• Fixed a memory leak in the Tracker Manager when handling Onboard/Remote Trackers

• Fixed an issue with the classification track data buffer not running it’s expiry timer to tidy stale tracks

Version 4.10.0 Build 877 - 02 September 2021

Orca Tracker 4.10.0.213 Release Notes - NavOS Tracker 4.10.0.213 Release Notes

Fixed

TUN-4742 - Fixed issue with Hyperspike integration where audio tracks were not being displayed in the UI and token errors were be reported for control messages which were being initiated before connection authorisation.

TUN-4742 - Fixed a concurrency issue with the AlarmList message that was occurring under load with a high level of reported alarms.

Version 4.10.0 Build 876 - 27 August 2021

Orca Tracker 4.10.0.213 Release Notes - NavOS Tracker 4.10.0.213 Release Notes

Fixed

TUN-4768 - Fixed Log Retrieval causing unhandled exceptions

Version 4.10.0 Build 874 - 23 August 2021

Orca Tracker 4.10.0.212 Release Notes - NavOS Tracker 4.10.0.212 Release Notes

Improvements

TUN-4724 - Updated Milestone view update to be sent every 5 seconds

TUN-4741 - Added vertical scroll bar automatically for track parameters profile settings

TUN-4723 - Added error handling to Milestone Transmit Message calls

Fixed

TUN-4747 - Fixed issue with radial menu not showing when history tracks on PPI

Version 4.10.0 Build 871 - 08 August 2021

Orca Tracker 4.10.0.212 Release Notes - NavOS Tracker 4.10.0.212 Release Notes

Fixes

• TUN-4713 - Fixed issue where the XProtect clients stops receiving latching messages once they have been closed and reopened / reconnected

• TUN-4179 - Fixed issue where track Id overlays are remaining on video viewers in XProtect client after the track is no longer latched

• Fixed camera viewer absolute position move not using camera position

Version 4.10.0 Build 870 - 02 August 2021

Orca Tracker 4.10.0.212 Release Notes - NavOS Tracker 4.10.0.212 Release Notes

New Features

• TUN-4067 - Added Red Vision RVX2 camera

Version 4.10.0 Build 869 - 26 July 2021

Orca Tracker 4.10.0.212 Release Notes - NavOS Tracker 4.10.0.212 Release Notes

New Features

• TUN-4638 - Integrated the Avigilon H4 IR Camera

• TUN-4185 - Introduced new relative and absolute controls in the camera viewers. Absolute control now includes “point to move” where the camera will move to the selected position in the viewer. Relative control now features and click and drag control which enables proportionally movement of the camera in any chosen direction.

• TUN-4652 - Changed the manual zoom operation in camera viewers to use absolute control. This enables smoother transition between camera operations because we know the zoom level and can also hold a zoom level for certain manual operations such as “point to move”.

Improvements

• TUN-4688 - Improved handling of last camera target and position to ensure more accurate control when moving between different camera operations

• TUN-4644 - Improved the ONVIF connection logic so that if we fail on first connection to a camera we still try and reconnect

• TUN-4658 - Split out weight and strength clusters for the False Alarm Analysis and used weight / range and strength / range clusters instead. Both can be enabled independently now.

• TUN-4648 - Ensured we do not "disconnect" an ONVIF camera when we get an error from a command. We allow a certain number of failed messages before we consider any ONVIF to be “disconnected”. Even when disconnected the controller will attempt control again after a back-off time.

• TUN-4617 - Added an optional database health sub-element to the Management Server module element for the ICD-001 Status Report.

Fixes

• TUN-4643 - Fixed issue with camera communications handling causing unexpected disconnections. This fix appears to overcome a lot of the message unreliability we were experiencing on many of the ONVIF cameras.

• Fixed 360 Vision RTSP Stream Port Number so it now has the correct default value.

• TUN-4641 - Resolved memory issue when creating new areas. Each edit and save of an area was causing a memory leak. This was more significant on large areas. This is an important fix although it only really impacts sites which are in commissioning or ones that undergo frequent change.

Version 4.10.0 Build 865 - 25 June 2021

Orca Tracker 4.10.0.211 Release Notes - NavOS Tracker 4.10.0.211 Release Notes

Fixes

• Fixed issue with legacy radars not correctly applying the encoder count causing radar data to look incorrect

Version 4.10.0 Build 864 - 21 June 2021

Orca Tracker 4.10.0.209 Release Notes - NavOS Tracker 4.10.0.209 Release Notes

Fixes

• Fixed issue with SightLogix network timeout

Version 4.10.0 Build 863 - 18 June 2021

Orca Tracker 4.10.0.209 Release Notes - NavOS Tracker 4.10.0.209 Release Notes

New Features

• TUN-4593 - Implemented ability to move and fetch logs from radar & tracker via SSH

• TUN-4581 - Added a system schedule including appropriate message to capture radar and OBT logs via SSH

• TUN-4596 - Added the property Min Plot Track to the tracking parameters in Witness

• TUN-4598 - Highlight connector and node when mouse is over the link line

Improvements

• TUN-4615 - Added asset code, latitude and longitude to export CSV

• TUN-4634 - Minor improvements to ONVIF service calling

Fixes

• TUN-4601 - Increased SSO Path field visible length to 1000 characters

• TUN-4594 - Fixed radars not being selected in the Schedule view for Capture Clutter Floor Later

Version 4.10.0 Build 856 - 18 May 2021

Orca Tracker 4.10.0.201 Release Notes - NavOS Tracker 4.10.0.201 Release Notes

Fixes

• TUN-4592 - Fixed issue with Traffic Analysis stopping working if a Track Engine is restarted from the UI

Version 4.10.0 Build 855 - 13 May 2021

Orca Tracker 4.10.0.201 Release Notes - NavOS Tracker 4.10.0.201 Release Notes

New Features

• Added new Milestone/Siveillance Client Plugin

• TUN-4544 - Enabled use of camera areas with static cameras

Improvements

• TUN-4541 - Improved visibility of the static camera FOV outline for both User Interfaces

• TUN-4440 - Added zoom scaling to alarm location ellipse line thickness

• Increase max camera range from 4000m to 12000m

• Disabled the mouse wheel of combo box when it is not in the editable mode

• TUN-4543 - Prevent cameras from following tracks which are too close using a configurable min range setting

• Ensured a user with only user level access can clear tracks after performing a locate tracks from the pending alarm list

• TUN-4553 - Allowed a slave camera to mirror a master camera configured for manual operation

Fixes

• Fixed error handling track engine failover with radars offline

• TUN-4523 - Fixed Management Server not starting correctly unless UI installed

• Fixed issue when your changing from time to night time and back again in scheduler the times are not editable

• Fixed night time schedules (based on first/last light) appear to be inverted

• TUN-4563 - Fixed history buttons on track mini control

• Fixed issue with Reset Settings not allowing save of user

• Fixed issue with User Settings always able to save on first edit

• TUN-4577 - Ensured the Milestone Plugin can record the UI stream on its own without additional camera mappings

• Fixed Password Complexity issues when creating a new user or changing a password

Version 4.10.0 Build 845 - 20 April 2021

Orca Tracker 4.10.0.201 Release Notes - NavOS Tracker 4.10.0.201 Release Notes

Fixes

• Fixed error handling track engine failover with radars offline

• TUN-4523 - Fixed Management Server not starting correctly unless UI installed

Version 4.10.0 Build 840 - 26 March 2021

Orca Tracker 4.10.0.201 Release Notes - NavOS Tracker 4.10.0.201 Release Notes

Fixes

• Fixed intermittent problem with the tracker to overcome the issue where it was accepting any configuration updates including radar rotation changes.

• Fixed an issue with the FLIR SDK where one of the calls was not working under .NET Core which prevented the software connecting to a FLIR camera.

• Fixed an issue with the camera mini control which was preventing it from showing for 360 Vision cameras.

Version 4.10.0 Build 837 - 22 March 2021

Orca Tracker 4.10.0.198 Release Notes - NavOS Tracker 4.10.0.198 Release Notes

Fixes

• Fixed radars not appearing in Situational Awareness

• Fixed check for camera selection for Latching to include camera Enabled and connection status

Version 4.10.0 Build 836 - 17 March 2021

Orca Tracker 4.10.0.196 Release Notes - NavOS Tracker 4.10.0.196 Release Notes

Fixes

• Fixed issue with too many notifications being raised when upgrading a tracker

Version 4.10.0 Build 834 - 15 March 2021

Orca Tracker 4.10.0.196 Release Notes - NavOS Tracker 4.10.0.196 Release Notes

New Feature

• Added the new Tracker Fast Start feature

• TUN-4376 Added a radar summary list to the topology

• TUN-4349 Implemented the New Zealand Traffic Authority logging output to record traffic analysis data

Improvement

• TUN-4398 Added the ability to export the radar topology list as a CSV file

• TUN-4394 Improved the design of the person track marker

• TUN-4393 Added a UI notification and system log for when a tracker upgrade has finished

• TUN-4392 Added a UI notification and system log when a tracker update is started

• TUN-4358 Added the new tracker disconnection timeout to the tracker config so it can be changed globally in Witness

• TUN-4355 Added a text name / Id to the TA section data for use in the TG log output

• TUN-4347 Added the ability to filter tracks by FA probability in the main track query options (not FA track query)

• TUN-4338 Added an optional map control to the Site Config Report and changed the OK button to Cancel

• TUN-4336 Radar data is only prevented from being displayed in the UI as a result of a disconnect error

• TUN-4328 Added a 10min warning UI notification 10mins before the unlicensed grace period ends

• TUN-4327 Added a licence count down in UI title bar showing remaining time for the unlicensed grace period

• TUN-4285 Reworked the incident report to include its own display control so we can set all the display options independently of the main display

Bug

• TUN-4439 Fixed exception when adding a new Truth Data (track)

• TUN-4433 The first (single) radar is not visible or editable in the group dialog after adding it

• TUN-4432 Fixed when adding new layers, the active layers drop down in the user settings is not dynamically updated

• TUN-4430 Removed Edit buttons from side panel group lists for radar and POIs

• TUN-4410 The first (single) POI is not visible or editable in the group dialog after adding it

• TUN-4402 Fixed problem with firmware reflection error in Camera Device Manager - related to installation bug in V4.9

• TUN-4370 New panel windows are never tidied because they are never added to the panel collection

• TUN-4367 Improved the cluster data saving routines to use appropriate collections and sensible XML structures. Ensure tests are also updated.

• TUN-4357 Ensured the SMS plugin works in both AG and CW & ensured the API works

• TUN-4356 Fixed an issue where the RTS Plugin UI element is not initialised properly

• TUN-4346 Ensured all the report preview dialogs have a title

• TUN-4344 The first time a user / system logs into the web UI the main map does not load and you get a refresh link

• TUN-4335 Fixed an issue where the zoom control was not working on the report preview control

• TUN-4312 Multi-select combos in the queries are not showing the selections when collapsed

• TUN-4227 Fixed an issue which was preventing manual change and saving of the POI lat / long

Documentation

• TUN-4400 Documented the video viewer selection setting

• TUN-4391 Updated the email plugin documentation to cover the use of multiple email addresses

• TUN-4388 Recorded a video to create a simple Area Movement Rule

• TUN-4332 Updated the camera list with latest models

• TUN-4326 Updated documentation to cover the improved incident detection report

• TUN-4317 Created a video to create a detection area and add it to a channel for a radar (using detection area option on radial menu)

• TUN-4316 Updated video for restoring a config from a different site

Related Information