Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 22 Current »

Introduction

This rule checks to see if a track has moved from Area 1 to Area 2. There is no time associated with this check and it relies on the track Id being maintained between the areas. Typically this is a very effective way to check where a track has entered a site. You can specify that if a track has come through an area and moved into a secure area that it was either an unauthorised or authorised route and raise an alarm as required.

Contents

Configuration

Nodes

Input

Track Sighting Input https://navtechradar.atlassian.net/wiki/spaces/TUN/pages/1874853893/Rule+Inputs#Track-Sighting-Input

Checks

Area Check 1 https://navtechradar.atlassian.net/wiki/spaces/TUN/pages/1866498140/Rule+Checks#Area-Check

We use the AnyTime option on this area check which means this check will evaluate to true if the track has at any time passed through this area, it does not need to be in the area at the time of the check.

Area Check 2

This check is Now, which means the track must be in this area at the point this check evaluated.

Actions

Alarm https://navtechradar.atlassian.net/wiki/spaces/TUN/pages/1874854150/Rule+Actions#Alarm

Camera https://navtechradar.atlassian.net/wiki/spaces/TUN/pages/1874854150/Rule+Actions#Camera

PPI Example

However, if the track only enters one Area, then no alarm is raised:

Related Information

  • No labels

Safety is everything.