Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 20 Current »

Introduction

The Standard User login provides access for features of the radar that you will require. This includes all of the settings that non-users can view: Vertex User Guide plus access to network settings.

The additional features that you have access to are covered in this section.

Contents

Standard User Login to Vertex

Once you have accessed the radar interface as described here: https://navtechradar.atlassian.net/wiki/spaces/PROD/pages/29294899/Vertex+User+Guide#Accessing-the-Radar-Interface, you will be able to login to the system:

  1. Click the Login button highlighted in pink below:

  2. This will open the Login dialogue:

  3. Enter your Name and Password and click Login:

  4. You will then be logged into the system, and the main Status screen will be displayed:

  5. The Vertex pages have been configured to show tooltips to aid the operator. To enable these simply press Ctrl+Q

Command Buttons

There are several additional commands available to you. For information regarding commands available to everyone please refer here: https://navtechradar.atlassian.net/wiki/spaces/PROD/pages/29294899/Vertex+User+Guide#Action-Commands-%5BhardBreak%5Dunrestricted.

Action Menu

There are four options within the Action Menu:

Shipping Halt

This process will power off the system. For the system to recover, physical access will be required to disconnect and then reconnect the power for the radar. Therefore, a warning message is given.

  1. To confirm the shipping halt, enter the code in the field provided and click the Halt button.

Recalibrate

This process will recalibrate the radar. A confirmation message is displayed.

  1. To recalibrate click the Recalibrate button.

Reboot

This process will reboot the radar. A confirmation message is displayed.

  1. To reboot click the Reboot button.

Field Reset

This process will reset the system, and return the radar to it’s operational default settings whilst maintaining the IP Address. Therefore, a warning message is given.

  1. To confirm the reset, enter the code in the field provided and click the Reset button.

Upload

Licence File Upload

This feature is deprecated and will be removed in a future version.

Firmware File Upload

This option is to upgrade the radar firmware.

  1. You will need to choose the new firmware file to upload by selecting the Choose File option:

  2. This will open File Explorer to enable you to locate it and click Open:

  3. The file will then be displayed in red next to the Choose File button. Click the Upload button:

  4. A progress bar will be displayed:

  5. The system will then check the file and then asks to proceed. To do this click the Apply Update button:

  6. The system will then update, and then reboot. You should wait and do not power off until the firmware upgrade has completed.

  7. Once the system has rebooted then you can check the footer on the Vertex homepage has the correct version number:

Delete Licence File

This feature is deprecated and will be removed in a future version.

Logout

To logout as a Standard User, click the Logout button:

Related Information

  • No labels