Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Introduction

The Radar Data Playback feature enables the playback of a radar data recording. Each radar can be configured to playback a recording of data which was captured from a real radar. This works as if it was connected to a real radar.

​The main element that is missing is the radar health data which we collect in real time from the radar. ​In playback mode we simulate the health data.

Contents

Configuring Radar Data Playback

1. Ensure that the Track Engine Provider Type is set to Cp Tracker for the radar that you are configuring for playback:

2. Copy the recorded Radar Playback CPR file in the Playback subfolder; C:\ProgramData\Navtech\Playback

The Program Data file is hidden by default.

All playback files must go onto the same system as the Track Engine. Where there are multiple Track Engines, it must be the Track Engine that is responsible for the radar for which you want to play back data.

3. Restart the Track Engine:

4. Edit the Radar Configuration to have a Source Type of Playback:

5. Select a Playback File you have copied to the Playback folder and save:

6. Select the radar on the PPI and the Tracker Playback Controls in the radar info panel will be enabled:

7. There are per radar play controls:

8. There is also an overall play control. This global playback is used when there is more than one radar configured for playback; it allows you to start and stop recordings across multiple radar:

Related Information

  • No labels

Safety is everything.