Introduction
This page covers how to configure a Speed Rule which includes an ML Classification verification. It concludes with a video demonstrating this verification.
Speed rules are Section Rules. This means that, by default, each section is examined at regular intervals for evidence of of one or more tracks breaking the rule.
Contents
Configuration
To configure a Speed Rule with ML Classification:
Select the carriageway and click on the Actions button:
Select Rules:
On the Configure Rules window select New:
Select Speed from the drop down list:
Then click Create Rule:
The default rule settings can then be adjusted as desired. In the example below the Sub Type, Speed, Sow Areas In Alarm, Severity, Action, Alarm Description and Alarm Priority were changed:
Then, open the ML Classification tab and select Enable ML Classification and click Save:
The new rule is now displayed in the Configure Rules window:
Video
The following video demonstrates the output of the ML on the viewer as it identifies a vehicle (blue car), a cyclist and another vehicle (red car) while they are tracked by the camera. The rule is broken when the red car slows down due to the blue car turning left in front of it:
Related Information
-
ClearWay™ System Design (Witness 4.0)
-
Getting Started (Witness 4.0)
-
ClearWay™ V4.7.x Release Notes (Witness 4.0)
-
ClearWay ™ (Products)
-
ClearWay™ V4.5.x Release Notes (Witness 4.0)
-
ClearWay™ Track Queries (Witness 4.0)
-
ClearWay™ V4.4.x Release Notes (Witness 4.0)
-
ClearWay™ V4.3.x Release Notes (Witness 4.0)
-
Final Steps (Witness 4.0)
-
Adding ClearWay™ Radar (Witness 4.0)