Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

Introduction

This page covers how to configure a Speed Rule which includes an ML Classification verification. It concludes with a video demonstrating this verification.

Speed rules are Section Rules. This means that, by default, each section is examined at regular intervals for evidence of one or more tracks breaking the rule.

Contents

Configuration

To configure a Speed Rule with ML Classification:

  1. Select the carriageway and click on the Actions button:

  2. Select Rules:

  3. On the Configure Rules window select New:

  4. Select Speed from the drop down list:

    image-20240115-152249.png

  5. Then click Create Rule:

    image-20240115-152424.png

  6. The default rule settings can then be adjusted as desired. In the example below the Sub Type, Speed, Show Areas In Alarm, Severity, Action, Alarm Description and Alarm Priority were changed:

    image-20240522-083822.png

    Then, open the ML Classification tab and select Enable ML Classification select the Classifications and click Save:

    image-20240522-083756.png

  7. The new rule is now displayed in the Configure Rules window:

    image-20240115-153258.png

Video

The following video demonstrates the output of the ML on the viewer as it identifies a vehicle (blue car), a cyclist and another vehicle (red car) while they are tracked by the camera. The rule is broken when the red car slows down due to the blue car turning left in front of it:

Slow_vehicle_ML_verification (1).mp4

Related Information

  • No labels

Safety is everything.