Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Introduction

On this page:

Alarm Queries

  1. Alarm Locations: this query will determine the location of any alarms within the time period and record limitations. The results are depicted as squares in the detection area. 
    1. Colour: this determines the colour of the quadrilateral icons that represent alarm locations on the PPI.


  2. False Alarms: this query will determine the location of any false alarms within the time period and record limitations. The results are depicted as squares in the detection area. 
    1. Area Covered (m): 
    2. Colour: this determines the colour of the quadrilateral icons that represent false alarms on the PPI.


  3. Alarm Query: this query will determine whether any incident alarms were raised within selected parameters. The query can both determine the position of an incident alarm, and which rule(s) were broken if an incident alarm had been raised. This query, like all, is still subject to time period and record limitation. The results are displayed on the PPI as a red circular icon, and as graphs of alarm activity in the results panel. The variables are decided by the following categories: 
    1. Areas:
    2. Rules: you may select multiple rules to query at once. 
    3. Users:
    4. Radars:
    5. Analysis Status:

Related information

  • No labels

Safety is everything.