KTS - Radar Wiring Detail

Owned by James Eadie
Last updated: Jan 25, 2024
2 min read

Detail below defines the wiring connection to the Radar unit.

Refer to the separate configuration sheet for network settings.

The Ethernet dust cap must always be fitted if the Ethernet cable is not in place to ensure the integrity of the unit.

  1. Pressure Valve – do not remove.

  2. Earth point – M5x10 thread – to suitable earth grounding point

image-20240125-111901.png

  1. M12 External power cable 5m. Navtech part No. WIR0139 (if supplied)

image-20240125-111941.png

Signal

Colour

Signal

Colour

24v

White

24v

Brown

GND

Green

GND

Yellow

  1. Ethernet connector or Dust Cap.

 

 

Next:KTS - Factory Acceptance Test

Home:KTS - Radar Documentation