Power supply details - AdvanceGuard

Owned by James Eadie
Last updated: Feb 10, 2022 by Rick Poulton
2 min read



On this page:

Power Supply Examples

  • Relec Part Number: AMR5-24

  • 24V Stabilised Power Supply

  • Input 90-240V AC

  • Output 24V / 4A DC.

  • Dimensions: 57mm x 90mm x 91mm

  • Operational range -40 to 70C

  • Snaps to DIN rail EN 60715 35x7

 

To maintain compliance to the applicable EU Low Voltage Directive Electrical Safety standards:

  1. The PSU selected should not exceed 100W, or

  2. As part of the installation, the PSU output should be fused to less than 100W

 

PoE+ Supply

If you are using the PoE+ supply option then a suitable PoE surge protector should be used, if required, to ensure compliance with the PoE operating conditions*. Where a surge protector is installed, connect its earth strap to earth.
Note: Switch power supply / cabinet earth should be same as that of the Radar head and surge protector or earths should be measured for potential difference.

*PoE Power Supply Considerations

Recommended Operating Conditions: 

DC Supply Voltage: 36 to 57V

Absolute Maximum Ratings1:

DC Supply Voltage: -0.3 to 60V

DC Supply Voltage Surge for 1ms: -0.6 to 80V

1Exceeding the Absolute Maximum Ratings may cause permanent damage to the product.