Essential Equipment list for CIR installation

NOTE: Radars are network intensive. Some laptops reduce the performance of their network connection when only running on their internal battery.

Electrical Power
Electrical power (110 to 230vAC) sourced from, for example, local mains.
110 to 230vAC power is required for the Radar's 24vDC PSU.
110 to 230vAC power is also required for the Laptop Computer used during the commissioning process.

- Web Browser (IE v10 or higher, Chrome)
- RJ45 Ethernet connection.
- 9 pin Com port or USB to RS232 adapter [Optional]
- Software – SPxRadarViewLite-V1.59.3 or higher, with correct configuration file
Cat5E shielded patch lead (or Cross over cable, if laptop doesn't have Auto-MDIX)

The minimum for one radar is:

Bolt fixings pack supplied with the radar including:
- x8 off M8 bolts A4 Stainless Steel
- x4 off M8 spring washers A4 Stainless Steel
- x4 off M8 plain washers A4 Stainless Steel
x1 off Mount plate and mounting fixings (refer to Installation section to see examples, this will depend on your mounting choice)
x1 M5 bolt
Suitable earthing cable to fit to M5 bolt hole
5m tape measure
A Digital Inclinometer (accurate to 0.1°)
x2 off 25m² Radar Target (Navtech part number MBP0137)
x2 off Tripod for mounting Radar Target (Optional, this requirement will vary depending on application)
Pair of 2 way radios
Adjustable spanners
An assistant
Radar Power Supply cable (supplied with Radar)
A way of working safely at height

Power Supply Details

On this page:

Page contents will be auto-generated for all headings 1-3