Skip to end of banner Go to start of banner

Relay Group Settings

Skip to end of metadata

Created by Charlotte Dakin-Norris , last modified on Jul 06, 2022

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Introduction

These settings allow authorised users to activate/deactivate relays from the User Interface. They apply to both AdvanceGuard® and ClearWay™.

Contents

Relay Group Settings

Name: The name given to the Relay Group.

Description: The description of what the Relay Group controls.

Relay List: The number ID or ID’s of the relay or relays that the Relay Group controls.

Please refer to Using Relay Group Settings for how to configure and use Relay Groups.

Related Information

Page:

Sections (Witness 4.0)
Page:

ADAM-6060 Relay Plugin (Witness 4.0)
Page:

Viewers (Witness 4.0)
Page:

Entity Timeouts (Witness 4.0)
Page:

Cameras (User Details) (Witness 4.0)
Page:

Advanced User Interface (Witness 4.0)
Page:

UI Stream (Witness 4.0)
Page:

Track Correlation (Witness 4.0)
Page:

Quick Reports (Witness 4.0)
Page:

Camera Settings (Witness 4.0)

No labels

Safety is everything.