Navigating the Display
The primary display is a canvas that shows the raw radar data as a green image. This canvas can be panned and zoomed, and areas can be moved and reshaped anywhere over the radar data image.
Pan the Display
To pan the display, using the mouse click and drag the canvas in the required direction.
Zoom the Display
To zoom the display, place the mouse of the canvas and use the mouse wheel to zoom in and out.
Editing an Area
Moving an Area
To move an area:
Select the area
Select the Edit button
Move the mouse within the boundary of the area until the icon turns to a 4 way cross, hold down the Ctrl key and drag the area to the desired location using the mouse
Select the Save button when complete or the Cancel button to undo your change
Changing an Area Shape
To change an area shape:
Select the area
Select the Edit button
Add or remove area points - see Editing Points below
Using the mouse, left click and drag points to create the desired shape
Select the Save button when complete or the Cancel button to undo your change
Editing Points
To add a Point:
To add a point left mouse click on a vertex node. A new area point will appear with two new vertex either side.
Drag the new point to the desired location
To remove a Point:
Left mouse click on an area point whilst holding down the Ctrl key. The point will be removed and the area will redraw appropriately.
Related information
-
Adding a Relay Device (Industrial Automation)
-
Configuring Areas (Industrial Automation)
-
Quick Setup Guide (Industrial Automation)
-
Area Settings (Industrial Automation)
-
Configuration Options (Industrial Automation)
-
Starting SafeGuard™ (Industrial Automation)
-
Requirements (Industrial Automation)
-
PPI Display (Industrial Automation)
-
Radar Point Data (Industrial Automation)
-
Application Settings (Industrial Automation)
-
Application Installation (Industrial Automation)
-
Commissioning SafeGuard™ (Industrial Automation)
-
Application Overview (Industrial Automation)
-
SafeGuard™ Configuration Application (Industrial Automation)