Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

On this page:

Creating a Camera Specific Area

To assign a Camera Area to a particular Camera, the Area needs to be created in that Camera's settings.

  1. Enable the Config Function. Select the Areas folder in the Configuration Tree, then select New in the configuration panel.


  2. In the configuration panel, select New Area.


  3. This will open the New Area Wizard window. Name the area, and select Camera for Area Type. Select Finish.

  4. The new Camera Area will appear on the PPI.

  5. Use Standard Editing and Creating to configure the Camera Area shape, the select Save.

  6. Next, enable the Config Function, then select the desired Camera in the Configuration Tree (or on the PPI Display).

  7. In the Configuration Panel, the Camera Settings will appear. Maximise the Areas section.

  8. The Area will appear as a grey row in the Areas table. Select Edit, then check Selected'to assign the new Camera Area to the Camera.

  9. Select Private if you wish to create a Private Area. By default, Areas are created Public. Fill colours are only visible on Public Areas - Private Areas have a grey cross-hatching fill.

  10. Select Save when finished. Your new Area will only be visible on the PPI when the Camera is selected. The second image is a graphic translation of the first image, as used in Camera Area diagrams below.

Related information

  • No labels

Safety is everything.