Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »

These release notes cover ClearWay™ V4.8 and above.

Please note that version 4.8 of ClearWay™ requires a new licence when upgrading from earlier versions. To create the new licence ensure you use the equivalent version of the Licencing Tool.

On this page:

Version 4.8.0 Build xxx - xx June 2020

Tracker 4.8.0.144 Release Notes

New Features

  • TUN-3707 - Added support for the Bosch AUTODOME IP starlight 5000i IR

  • TUN-3760 - Added support for the Vision 360 Predator x40 ONVIF

  • TUN-3820 - Added support for the Vision 360 Predator x40 using Vision 360 Protocol. Telemetry control via the 360 Vision protocol is recommended over using ONVIF because it offers more features

  • TUN-3777 - Added support for the Axis Q8742-LE Zoom

  • TUN-3776 - Added the option to send Traffic Analysis reports on creation instead of being collated. This means TA reports are sent from the Track Engines as they are generated. With this option enabled it is up to the subscribers to collate the all the data to get overall carriageway data.

  • Added formal support for BVMS, Milestone and Genetec Plugins

  • TUN-3721 - Added the option to use the harmonic mean to calculate the average speed for the Traffic Analysis report

  • TUN-3814 - Added a new shortcut to latch a track with a camera by right clicking on the track. This is a user optional feature and is disabled by default

Improvements

  • TUN-3713 - Updated the Witness Camera Tool to show more camera details and allow absolute position to be sent on demand instead of automatically on user interaction

  • Added consistent camera mapping configuration for all VMS plugins. This ensures we can support cameras with dual lenses and also support duplicate bookmarks across multiple recorders

  • Added re-classification rule triggers for ML Classification. These can now be configured as part of the central ML Classification settings

  • TUN-3578 - Added an option to the radar info panel with the other rotation controls to enable the rotation of the contour area without rotating radar data

  • TUN-3661 - Added a channel filter to the track recorder so recording can be limited to either a specific tracking channel or the debris channel

Fixes

  • TUN-3779 - Fixed a problem with missing data in the ICD-002 reports

  • TUN-3817 - Fixed the issue ICD-002 was reporting transposed SWEREF co-ordinates

  • Fixed an issue which was preventing new carriageway rules from being saved

  • TUN-3727 - Fixed an issue where the Milestone plugin was trying to access cameras from the server when AdvanceGuard is closing

  • TUN-3796 - Fixed the UTC / local time display issue for system notes dialog

  • Fixed an issue that was causing the initial rotation of the radar contour area to random jump when not using the mouse wheel

  • TUN-3768 - Fixed an issue to ensure that camera groups work as expected so they now use the maximum follow time for tracks of the same priority

  • Fixed a display issue in the Topology Manager, where the Current Ram tooltip was incorrect

  • Fixed an issue with the False Alarm query not be cleared properly which prevented the heat map displaying when you change colours

  • Fixed an issue with unlatching cameras that was causing an additional unwanted camera tasking after unlatching a track

Any rules that were created without using the carriageway wizard in older versions will need to be deleted and re-created in order to fix the issue with them not saving after an edit.

Due to the improvements for the VMS plugins, we recommend you check any existing installations using the Milestone, BVMS or Genetec plugins after the upgrade to ensure the camera mapping is configured as expected.

Version 4.8.0 Build 677 - 05 May 2020

Tracker 4.8.0.142 Release Notes

Fixes

  • Fixed an issue with integration plugins not being able to create bookmarks or alarms in external VMS systems

Version 4.8.0 Build 675 - 27 April 2020

Tracker 4.8.0.142 Release Notes

New Features

  • TUN-3672 - Added title bar to entity config panel

  • TUN-3675 - Added optional basic target data to video viewer overlay

  • Installer can now install services using domain credentials

  • TUN-3621 - Moved UI layout configurations to database

  • TUN-3636 - Added disk space stats to topology view

Improvements

  • Services will now by default be installed using TLS for service to service communication

  • Trackers will now by default be configured from new to use TLS for onboard communication

  • TUN-3676 - Reduced minimum size of video viewer and added automatic aspect ratio resizing

  • TUN-3698 - Ensured only an administrator can import a license

  • TUN-3632 - Added check for image dpi in background image importer

  • TUN-3644 - Ensured both AG and CW will have the same default threshold window size

  • TUN-3664 - Ensured the User and Engineer accounts will by default be disabled

  • TUN-3671 - Ensured that default mechanical delay is 800ms for all cameras

  • TUN-3673 - Ensured the cameras PTZ controls can be hidden via a video viewer config option

  • TUN-3585 - Added an expirable area to Highways that contains the viewport of a display

  • TUN-3605 - Added an ICD-001 command to set track filter view ports in Track Engines

Fixes

  • TUN-3696 - Fixed issue with camera lock going home after time out

  • Fixed camera/target selection logic to correctly choose the closest target to a camera

  • Fixed ML Classification configuration not appearing in global settings

Due to the layout settings for the UI now being stored in the users settings in the database, the UI layout may reset to defaults after an upgrade

Related information

  • No labels

Safety is everything.