Introduction
This section covers Perimeters. A perimeter is an area which does not completely enclose a space.
Contents
...
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
...
Adding a Perimeter
There is an option to create a perimeter which can be used for creating an area which does not completely enclose a space.
To add a perimeter, ensure you are in Edit mode and click the Add Perimeter button:
A Name Polyline dialogue will open:
You can select whether the perimeter will be an obstruction or not, and when you have labelled your perimeter click the Create button:
The mouse cursor will change to a cross hair. To To draw the perimeter, click the mouse to plot points on the map. Note: it is easier to plot the points if you zoom into the area:
Continue to plot your points where you want your perimeter to be. Left-clicking the last point twice finishes the perimeter:
Perimeter Properties
Area's Perimeters have a set of properties that can be used control their appearance.:
...
Name: The Name field allows you to rename the perimeter after creating it. There There is no limit on length, and it is sensible to use a meaningful name.
Obstruction: When enabled, the perimeter will be used in the calculation for determining what a radar can see. If If disabled, the perimeter does not impede the radar.
...
Click the Edit button:
Select the area either by selecting it from the Properties list or by clicking on the perimeter itself:
In this mode, you can change the name of the perimeter, it’s relationship with the radar, alter the colour and decide whether it is hidden.
To alter the shape of the perimeter, left-click one of the white points and drag it to a new location:
You can also left-click on one of the translucent white dots to add an extra white node:
To ' drag ' a perimeter around the map, hover your mouse over the perimeter until the curser changes from an open hand shape to a hand with a pointed finger, then hold down the Ctrl key and press the left mouse button to drag it around.
If you are unhappy with the editing, you can click Cancel and this will undo the last changes.
If you want to save your changes then click Save.
...
To delete a perimeter, you first must be in edit mode, then select the perimeter you wish to delete:
Once selected, press the Delete button:
A dialog will appear:
Select Yes to delete the perimeter from the scenario. If If you choose No, you will be returned to the editor.
Click Save to save the changes.
...