Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

The CIR sensor has been designed as a versatile sensor that can be used for a wide range of applications. This section will provide some examples of suitable radar locations, from which you should be able to gain an understanding of how to position the radar for your specific application. 

Radar sensor locations

Radar sensors must be positioned in such a location that they have optimum 'line of sight' to the objects they are to detect. CIR radar sensors scan in a horizontal beam, relative to the base of the sensor. If the sensor is mounted at an angle, the area that the radar scans will remain horizontal to the radar's base.

The radar data will produce a "peak" should an object appear within a detection zone, which can be used by software to generate alarms, adjust machinery or force stop vehicles. This zone is software configurable to lie within the scan area. Other factors to consider when choosing a mounting location include how close the radar is to a power source on the machine. Also accessibility, both for installation and on-going maintenance.

On this page:

Example 1 - Radar installed on top of a vehicle

The radar should be mounted vertically 

Example 2 - Radar mounted on a reclaimer scanning vertically

gop;

Example 3 - Radar mounted on a post

sdf

Further examples

For more examples of how the CIR sensor can be mounted, please see the section on determining radar locations for the I - Series. 

Related information

  • No labels