The CTS- series service kit contents
The kit required to service the CTS- series radar sensors is available from Navtech Radar. Please contact customer support with your radar model and serial number to obtain the correct kit.
The contents are as follows:
Drive assembly
O-ring
Plus:
Replacement battery
Self-adhesive pads
6x radome screws plus washers
Replacement breather valve
Additional items you will need
3mm hex key
5mm hex key
T20 Torx® key
Torque driver for hex and Torx keys
14mm spanner (for pressure gauge)
16mm spanner
Servisol® or Silicone grease
Loctite® 243
Soft dry brush
Pressure test gauge (see image below)
Hand or foot pump with Schrader fitting
Anti-static surface and wrist strap
Latex (or equivalent) protective gloves
Pressure test gauge. Order code: NAV0128