Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

Introduction

On this page:

AdvanceGuard® Alarm Panel

The alarm panel is part of the Live tab, and sorts alarms into five categories:

  1. Live Alarms: alarms that are active, and indicate a rule is currently being broken. 
  2. Pending Acknowledge Alarms: alarms that have been cleared but require manual acknowledgement by a user.
  3. System Alarm: alarms concerning the system e.g. network connection, radar connection, Track Engine health etc.
  4. Tracks:
  5. Retained Tracks:

Each Live Alarm in the alarm panel is tabled:

🔴🔊IdDescriptionCreatedAcknowledgedLocate
The severity of the alarm will be represented through a colour coded circular icon. A speaker icon determines whether the alarm is audible.A unique code assigned to each alarm. The type and location of the alarm.When the alarm first sounded.When the alarm was manually acknowledged by a user.An icon that focuses the PPI Display on the alarm location when selected.


Each Pending Acknowledge Alarm in the alarm panel is tabled:

🔴🔊IdDescriptionCreatedClearedLocate
The severity of the alarm will be represented through a colour coded circular icon. A speaker icon determines whether the alarm is audible.A unique code assigned to each alarm. The type and location of the alarm.When the alarm first sounded.When the alarm was cleared.An icon that focuses the PPI Display on the alarm location when selected.

Each System Alarm in the alarm panel is tabled:

🔴🔊IdDescriptionCreated
The severity of the alarm will be represented through a colour coded circular icon. A speaker icon determines whether the alarm is audible.A unique code assigned to each alarm.The cause of the system alarm.When the alarm first sounded.

Each Track in the alarm panel is tabled:


IDSpeed (m/s)DirectionLocateFollowClear

Track classification and severity, e.g. 

A unique code assigned to each track.The live speed of the track in metres per second.The live direction of the track in degrees.Select to locate and select the track, and follow it on the UI.Select for the camera to follow the track.Select to deselect and unfollow the track.

Each Retained Track in the alarm panel is tabled:


IDSpeed (m/s)DirectionLocateRemove

Retained track classification and severity, e.g. 

A unique code assigned to each retained track.The speed of the retained track at the point of triggering an alarm, in metres per second.The direction of the retained track at the point of triggering an alarm, in degrees.Select to locate the retained track.Select to remove the retained track from the UI.

Related information

  • No labels

Safety is everything.