Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »

Introduction

This section covers the concept of Folders within the Configuration Tree, and the purpose of grouping entities as Folders in certain functions.

Contents

Overview

Folders and sub-folders are the entities with the Configuration Tree. A folder is essentially an individual sub-section of the Configuration Tree. It may be desirable to quickly configure an entire group of entities at once, i.e. disable all Areas at once. For this purpose, there are the Folder functions: Enable and Show.

Enable

Toggling Enable or Disable Children changes whether all entity folders are enabled (active; switched 'on') or disabled (inactive; switched 'off') . For example:

  1. Select an entity folder.

  2. Toggle the Enable Children slider from the 'tick' graphic ✔ to the 'stop' graphic 🛇.

  3. All entities within the entity folder will now be disabled. 

Not all entities can be disabled. 

Show

Toggling Show or Don't Show Children changes whether all entity children are visible or hidden on the PPI Display. For example:

  1. Select an entity folder.

  2. Toggle the Show Children slider from the 'eye' graphic 👁 to the 'anti-eye' graphic 👁 .

  3. All entities within that entity folder will now be invisible.

With ‘eye’ graphic set to be visible:

With ‘eye’ graphic set to be invisible:

Related Information

  • No labels

Safety is everything.