Introduction
This page covers the ICD-001 Status Report.
Contents
...
Table of Contents | ||||||
---|---|---|---|---|---|---|
|
...
Example Status Report
Code Block | ||
---|---|---|
| ||
<?xml version="1.0" encoding="utf-8"?> <StatusReport xmlns="ICDNAV001-StatusReport" StatusId="23232"> <Sender SenderId="SenderId1" NetworkAddress="127.0.0.1" NetworkPort="6317" /> <ModuleStatus Reported="2019-04-03T22:05:02.112" Name="Management Server" Status="Online" ModuleId="3dc5d6e3-5bda-4625-bdef-6d6ecef363c2" ModuleType="ManagementServer"> <Health Type="Database" MinValue="0" MaxValue="0" Value="0" Status="Warning" /> </ModuleStatus> <!-- Module Track Engine 1 is offline --> <ModuleStatus Name="TE1" Reported="2019-04-03T22:05:02.112" Status="Offline" ModuleId="710e8979-effb-4d2d-94d4-205aa4bd0eae" /> <ModuleStatus Name="TE2" Reported="2019-04-03T22:05:02.112" Status="Online" ModuleId="C565AE57-95C5-4C17-8CF3-E19609067500" /> <ModuleStatus Name="Camera Controller" Reported="2019-04-03T22:05:02.112" Status="Online" ModuleId="AF648F4D-3342-406E-888A-F4FAD05B36AA"/> <!-- Radar 1 being reported as offline - therefore no health metric can be reported --> <RadarHealth RadarId="1" Name="Radar 1" Reported="2019-04-03T22:05:02.112" Packets="0" Temp="0" Rotation="0" Status="Offline" /> <!-- Radar 2 being reported aswith onlinea butconnection withstatus aof warning meaning a statustemporary becauseloss theof temperatureconnection isto toothe highradar --> <RadarHealth RadarId="2" Name="Radar 2" Reported="2019-04-03T22:05:02.112" Packets="801" Temp="8985" Rotation="2.0" Status="Warning" /> <!-- Radar 3 being reported as online but with a warning status because the temperature is too low --> <RadarHealth RadarId="3" Name="Radar 3" Reported="2019-04-03T22:05:02.112" Packets="8001600" Temp="59" Rotation="24.01" Status="Online" HealthStatus="Warning"> <Health Type="Temperature" MinValue="-20" MaxValue="90" Value="-22" Status="Warning" xmlns="ICDNAV001-CommonTypes" /> </RadarHealth> <!-- The current system profile is the set to the default --> <SystemProfileStatus Name="Default" ProfileId="-1" Reported="2019-04-03T22:05:02.112" /> <AreaSummary Reported="2019-04-03T22:05:02.112"> <AreaStatus Type="General" Name="Front Gate" AreaId="1" Enabled="Enabled" /> <AreaStatus Type="Detection" Name="Detection North" AreaId="2" Enabled="Enabled" /> <AreaStatus Type="Alarm" Name="Alarm Zone A" AreaId="3" Enabled="Disabled" /> </AreaSummary> </StatusReport> |
Status Report Element
The status report element has an optional StatusId attribute that will increment with every status report
Attribute | Description | Type | Unit |
StatusId | Incrementing Id of the status report | Long |
|
Module Status Element
The module status is essentially a heartbeat. Each module typically sends a heartbeat message every 5 seconds. For each module, assuming a heartbeat has been received, a status element will be added to the status report. If a status element is not present, then either the heartbeat has been delayed or the module has gone offline. When requesting a status report using a Command Message, the report can be filtered to only include the Module and Radar Health Status.
Module Status Attributes
Info |
---|
Optional attributes are formatted in italics and highlighted with an asterisk. |
Attribute | Description | Type | Unit |
Name | Name of the module. | String |
|
Reported | Time status was reported. | DateTime |
|
Status | Status of module connection – options are:·
|
ConnectionStatusTypeList |
| ||
ModuleId* | Unique identifier for the module (optional). | String (representation of a GUID / UUID) | |
ModuleType* | Module type (optional). This is available in Witness 4.0 and higher. | String | |
HostIP* | IP of the server hosting the module (optional). This is available in Witness 4.0 and higher. | String |
Module Status Health Element (Optional)
Info |
---|
Health elements of module status will only appear if the health elements are not heathy |
Attribute | Description | Type | Unit |
---|---|---|---|
Type | Type of Health - options are:
| HealthInfoTypeList | |
Status | Health Status - options are:
| HealthStatusTypeList | |
MinValue | Not used | Double | |
MaxValue | Not used | Double | |
Value | Not used | Double |
Radar Health Element
The radar health element provides specific health details for each sensor in the system. If a radar is active and connected then the Witness system will receive regular health updates. The latest health report for each radar is added to the status report. If a recent health update has not been received for any of the radar then there will be no element for that radar.
Radar Health Attributes
Attribute | Description | Type | Unit |
RadarId | ID of the radar | Long |
|
Name* | User-friendly name of the radar (optional) | String |
|
Reported | Time health was reported | DateTime | |
Packets | Radar packet rate per second. Value will vary depending on the range and mode of the radar | Double | |
Temp | The current operating temperature of the sensor | Double |
|
Rotation | The current rotation rate of the radar. Some models of radar have different rotation speeds but the default is 1Hz. | Double | |
Status | Status of radar connection – options are:
|
ConnectionStatusTypeList | |||
HealthStatus | Health Status of Radar - options are:
If Status of radar is Offline then the health status will be Unknown. | HealthStatusTypeList |
Radar Health Status Element (Optional)
Info |
---|
Radar health status items will only appear if the Radar has a HealthStatus of Warning or Unhealthy |
Attribute | Description | Type | Unit |
---|---|---|---|
Type | Type of Health - options are:
| HealthInfoTypeList | |
Status | Health Status - options are:
| HealthStatusTypeList | |
MinValue | Minimum value can be | Double | |
MaxValue | Maximum value can be | Double | |
Value | Value | Double |
Info |
---|
If the module or radar has been reported as being online, then if the system loses the connection to that application or device the status will change to reflect that. Typically, the application or device will change status from Online -> Warning -> Offline. |
...
Info |
---|
In situations where Witness is being used with recorded or simulated data then do not expect to receive radar health updates will be simulated to ensure the system remains healthy. Detailed health data, such as temperature, will not be available. |
System Profile Status Element
The system status element shows which system profile is currently active. The Id is the UserId of the profile and the name is also included to make the data more readable. When requesting a status report using a Command Message, the report can be filtered to only include the System Profile Status.
System Profile Status Attributes
Attribute | Description | Type | Unit |
Name | User-friendly name of the current system profile | String |
|
ProfileId | The profile Id of the current system profile | Integer |
|
Reported | Time and date that the status was last reported | DateTime |
Area Summary Element
The area summary element contains a list of Area Status elements. Each status element contains details on the area, including the user Id, name current state. When requesting a status report using a Command Message, the report can be filtered to only include the Area Summary Status.
Attribute | Description | Type | Unit |
Reported | Time and date that the status was last reported | DateTime |
|
Area Status Element
Attribute | Description | Type | Unit |
Type | The type of area. These map to the area types in Witness:
| AreaTypeList |
|
Name | The user friendly name of the area | String |
|
AreaId | The User Id for the area | Integer | |
Enabled | The current state of the area. Depending on the type of area, the state has different implications. For example, disabling an Alarm area means it cannot be used inside rules. If a Detection areas is disabled it means the tracker will not generate tracks in that area. Disabling an exclusion area will stop it excluding data from the tracker allowing it to generate tracks | Boolean |
...
Related
...
Information
Filter by label (Content by label) | ||||||
---|---|---|---|---|---|---|
|