Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Current »


These release notes cover Witness V3.5 and above, however only release notes from version 3.6 are available. Older release notes can be found here on the Extranet.

On this page:

Version 3.15.0 Build 940 - 25 April 2017


Fixes

  • Fix issue when changing IP Address of radar when tracker reconnects to new IP Address old address is incorrect sent back to UI.


Version 3.15.0 Build 939 - 20 April 2017

New Features

  • Add Coefficent names
  • Add Ignore Queue option to Speed Rule, Section Classification Rule and Reversing rules


Fixes

  • Fix name of TargetMinInitiationSpeed.
  • Fixed ONVIF Digest/Username token auth.
  • Improved ONVIF connection type detection.
  • Fix issue with playback files causing total resets of clutter map and processed data.

Version 3.15.0 Build 930 - 05 April 2017

New Features

  • Add IFF Track Filtering.
  • Add Target Min Initiation Speed to UI
  • WIT-2879 - Add existing water specific area tracking params to the UI.
  • Add supression options to region parameters


Fixes

  • Fix issue with creating a radar.

Version 3.15.0 Build 922 - 03 April 2017

New Features

  • WIT-2876 - Improved Speed Rule to allow filtering by area. This enables SVD on specified Emergency Rescue Areas.
  • WIT-2877 - Improve ClearWay Reversing Rule and Section Speed Rule to allow suppression of lanes based on nearby Queued sections. This will prevent false alarms caused by reflections from other lanes.
  • Added target checking for range calibration.


Fixes

  • Fix incorrect handling of save clutter map on the debris channel.

Version 3.15.0 Build 918 - 24 March 2017

New Features

  • STC improvements including a subtract option for the Clutter Guard to help remove unwanted noise from difficult environments.
  • WIT-2858 - Support for new HDR132
  • WIT-2859 - Improved ClearWay Speed rule to optimise it for Stop Vehicle Detection (SVD) when using the Debris Detection system. The rule no longer implements any section reset logic but adds two optional filter properties so targets can filtered based on attributes such as strength and weight. This enables the rule to alarm on larger items being detected by the Debris system (i.e. vehicles). This rule is hybrid section / track rule so works seamlessly with normal PTZ camera control and XML track output.


Fixes

  • Fixed a rare out of memory error in Canary client which was caused by receiving a very high number of tracks in each XML message.
  • Removed Z axis from camera home position to avoid confusion with the cameras Z position.


Download release from: /wiki/spaces/WIT/pages/1572901





  • No labels