Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

  1. Turn the rotating assembly in order to provide clear access to the small retaining bolts.
  2. Using a 3mm hex key (do not use ball ended drivers), loosen and unscrew the four small retaining bolts. The bolts are secured with Loctite and will be resistant to movement.
  3. The bolts are captive but when they are all properly released, carefully lift off the upper assembly from the turntable.

On this page:

Care point - Inspect the plastic lens or metal dish on the rotating assembly for dirt and debris. Clean any debris away using a soft dry brush.

       

Next: 2.3 - Remove the drive assembly

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.