Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

Introduction

Overview

On this page:

Carriageway Wizard Rules  

Configure Rules

There are 6 default rules:

  1. Person Rule
  2. Slow Vehicle Rule
  3. Reversing Vehicle Rule
  4. Queue Rule
  5. Debris Rule
  6. Stopped Vehicle Rule

Each is configurable, and has the ability to be switched on and off, or deleted. To configure the rules:

  1. Under the Config tab, select the Carriageway in the Entity Tree.
  2. In the configuration panel, select the ☰ options button next to Actions. 
  3. Select Rules, and a Configure Rules window will appear.

Creating a Rule

To create a new rule:

  1. In the Configure Rules window, select New.
  2. Select Rule Type:
    1. Speed Rule
    2. Queue Rule
    3. Classification Rule
    4. Reversing Rule
    5. Track Speed Rule
  3. Select Save. The new rule is now configurable as above.

Testing a Rule

Rules must be available to be tested to ensure that the correct alarms will be triggered when a rule is broken. In the Configure Rules window, there is a function for this exact task.

  1. Select the rule you wish to test. Then, select Test. 
  2. The Rule Test window will appear. Choose the Section and Lane you wish the alarm to be tested in, then select OK.
  3. On returning to the PPI Display, the alarm notifications will be visible (and if enabled, audible.)

Related information

  • No labels

Safety is everything.