Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Introduction

Your site was initially configured during the setup process, which is documented here for ClearWay™: Site Configuration and here for AdvanceGuard®: Site Config.

This page covers editing these settings and others within the site configuration panel.

Contents

Accessing the Site Configuration Settings

To access the site configuration settings:

  1. Select the site name on the Configuration Tree, which is the master folder of the Entity Tree (e.g. the site, Navtech Demo, as illustrated below):

  2. The site settings will then be displayed in the Configuration Panel:

Basic

Site Name: The name of the area under surveillance or the carriageway's position or site. This could be geographic.

Customer Name: Business or personal name associated with the customer/user.

Customer Reference: The reference applied to the customer by Navtech Radar Ltd. or a suitable name or number unique to this project, e.g. CRN0001.

Integrator Name: Name of person/company setting up the site, typically the system integrator.

Latitude/Longitude: The location of the site's origin. The origin is an arbitrary point within the site that can be identified on a map e.g. a building, stationary construction, signage. Once you have chosen an origin, it functions as a point of location reference for all other objects identified on the site.

Distribution Settings

Address: This should be an IP address on the User Interface client computer that the trackers can send data to.

Base Port: The starting UDP Port for Radar Data video distribution. Each radar where video data is activated will use a unique port number, starting from Base Port + 1.

Radar Show Limit: How many radars that can show video data concurrently. This is limited to control the bandwidth used at any given time. This is by default 3.

Quality: The quality of the radar data video. The higher the quality, the greater the definition when zooming in. However, higher quality radar data video requires greater network bandwidth.

Low

Medium

High

Ultra

Min. Logging Level:

Trace

Audit

Debug

Info

Error

Site Notes

This area shows the notes that have been recorded by customers and integrators, typically about setup and configuration changes. It is not editable here. please refer to Notes for more information.

Background Image

For further information, visit the Adding a Background Image page.

Radar Detection Area Setup

For further information, visit the Creating a Detection Area page.

Related Information

  • No labels

Safety is everything.