Introduction

These settings control Tag Presets in AdvanceGuard®. These are tags that can be attached to live tracks which can then aid the operator when identifying and analysing tracks during playback at a later date.

Contents

There are two pre-configured Tag Presets: Authorised Vehicle and Authorised Person. Both have their Severity set to Friend.

Adding a Track Preset

To add a new Tag Preset:

1. Click on the Edit button:
   

   

2. Then click the ➕ icon:
   

   

3. This will open the Add Tag Preset dialogue:
   

   

   Tag Preset: Enter a name for your new Tag Preset.

   Apply Severity: Select the checkbox to apply one of the following:

   • Unknown

   • Friend

   • Warning

   • Threat

4. Select OK to add the new Tag Preset to the list.

5. Click Save to retain the addition.

Deleting a Track Preset

Selecting the Edit button will also allow the operator to delete a Track Preset from the list:

Once an entry has been deleted then the option to Save will be enabled, so that the user can save the amended list.

Using Tag Presets

Tag Presets can be added to Live tracks via the Track Panel:

Double clicking on a track will open its Selected Track Dialogue. Clicking the Set Tag Preset icon will open the Set Tag And Severity option:

The operator can then select the appropriate tag, and the tagged track will have an entry in the Tag Preset column in the Playback Tab:

For more information about AdvanceGuard® Track Queries, please navigate here.

Related Information

• Page:
  ICD-001 Track Filter Command (Witness 4.0)
• Page:
  ClearWay™ Track Queries (Witness 4.0)
• Page:
  Exclusion Areas (Witness 4.0)
• Page:
  Playback Tracks (Witness 4.0)
• Page:
  Menus (Witness 4.0)
• Page:
  Live Tracks (Witness 4.0)
• Page:
  Creating a Rule (Witness 4.0)
• Page:
  AdvanceGuard® Alarm Panel (Witness 4.0)
• Page:
  Track Correlation (Witness 4.0)
• Page:
  Quick Reports (Witness 4.0)