Page Comparison

Example Highways Alarm Report

Code Block

language	xml

<?xml version="1.0" encoding="utf-8" ?>
<al:AlarmReport xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:al="ICDNAV001-AlarmReport" xmlns:cmn="ICDNAV001-CommonTypes">
  <al:Alarm AlarmId="5" Description="AnA Highways Alarm" Priority="2" Reported="20102012-04-03T22:05:02.112" Category="Rule" Severity="Warning" State="AlarmOn" Acknowledged="False" RuleId="1">
    <al:Payload SectionId="1" LaneId="3" CarriagewayId="2" SubType="Stopped" CarriagewayName="M25-J">
      <cmn:Distance DistanceFromOrigin=”99758”/>
      <cmn:GeoData Latitude="33.860012" Longitude="-1.7891123"/>
    </al: Payload >
  </al:Alarm>
</al: AlarmReport>

Example Security Alarm Report

Code Block

language	xml

<?xml version="1.0" encoding="utf-8" ?>
<al:AlarmReport xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:al="ICDNAV001-AlarmReport" xmlns:cmn="ICDNAV001-CommonTypes">
  <al:Alarm AlarmId="5" Description="A Security Alarm" Priority="2" Reported="2019-04-03T22:05:02.112" Category="Rule" Severity="Threat" State="AlarmOn" Acknowledged="False" RuleId="3">
    <al:Payload>
      <RelatedAreas>
        <Area Id="1" Name="Alarm Zone 1"/>
        <Area Id="3" Name="North Gate"/>
      </RelatedAreas>
    </al: Payload >
  </al:Alarm>
</al: AlarmReport>

Alarm Element

The alarm element represents a generic alarm, either incident or system health. In addition it can contain specialised alarm payloads which contain data specific to certain alarm types. Currently the only documented payload is for the Highways alarm which is covered below.

...

Attribute	Description	Type	Unit
Reported	Time alarm was reported	DateTime
AlarmId	Unique Id of the alarm	Long
Category	Alarm category – options are: – Rule – System – Health	AlarmCategoryList
Description	Description of the alarm – normally based on the alarm category or rule message	String
Severity	Severity of the alarm – options are: – Threat – Warning – Friend – Unknown	AlarmSeverityTypeList
State	Alarm state - options are: – AlarmOn – AlarmOff – Dismissed	AlarmStateTypeList
Priority	Indicates the level of priority based on the users requirements	Integer
Acknowledged	Indicates if the alarm has been acknowledged	Boolean
RuleId*	The id of the rule to which this alarm is associated	Integer

...

Attribute	Description	Type	Unit
SubType	Highways Rule SubType – options are: – Person – Stopped – Slow – Debris – Reversing – Queue – ERA – Enforcement	RuleSubTypeList
SectionId	Section Id in which alarm happened (note : this is the user entered Id not the system Id)	Integer
LaneId	Lane Id in which alarm happened (note : this is the user entered Id not the system Id)	Integer
CarriagewayId	Carriageway Id in which alarm happened	Integer
CarriagewayName	Carriageway Name in which alarm happened	String

Distance Attributes

Attribute	Description	Type	Unit
DistanceFromOrigin	Linear distance to centre of section in alarm from the carriageway origin	Integer	Metres

...

Attribute	Description	Type	Unit
Latitude	WGS 84 Coordinate	String	Decimal Degrees
Longitude	WGS 84 Coordinate	String	Decimal Degrees

Security Source Payload

The security payload contains additional data related to a security alarm.

Related Areas Element

This element contains a list of related areas. These areas are connected to the alarm, typically they will be alarm zones with real time activity that has triggered an alarm.

Area Attributes

Attribute	Description	Type	Unit
Id	User Id of the area related to the alarm	Integer
Name	The user configured name of the area	String

...

Related information

Filter by label (Content by label)

showLabels	false
cql	label = "icd-001" and space = currentSpace ( )

...

Versions Compared

Old Version 10

New Version 11

Key