The CTS- series service kit contents
The kit required to service the CTS- series radar sensors is available from Navtech Radar. Please contact customer support with your radar model and serial number to obtain the correct kit.
The contents are as follows:
Drive assembly
O-ring
Plus:
- Warranty void labels
- Replacement battery
- Self-adhesive pads
- 6x radome screws plus washers
- Replacement breather valve
Additional items you will need
- 3mm hex key
- 5mm hex key
- T20 Torx® key
- Torque driver for hex and Torx keys
- 14mm spanner (for pressure gauge)
- 16mm spanner
- Servisol® grease
- Loctite® 243
- Soft dry brush
- Pressure test gauge (see image below)
- Hand or foot pump with Schrader fitting
- Anti-static surface and wrist strap
- Latex (or equivalent) protective gloves
Pressure test gauge. Order code: NAV0128