Page Comparison

The following are essential additional items that you need to install a radar sensor:

• Electrical Power
  Electrical power (110 to 230vAC) sourced from, for example, local mains. 
  110 to 230vAC power is required for the Radar's 24vDC PSU.
  110 to 230vAC power is also required for the Laptop Computer used during the commissioning process. 

• Laptop computer
  The laptop should have:

• • Web Browser (IE v10 or higher, Chrome)
  • RJ45 Ethernet connection.
  • 9 pin Com port or USB to RS232 adapter [Optional]
  • Software – SPxRadarViewLite-V1.59.3 or higher, with correct configuration file Web Browser (IE v10 or higher, Chrome)
    
    
• Cat5E shielded patch lead (or Cross over cable, if laptop doesn't have Auto-MDIX)

The minimum for one radar is: 

• Bolt fixings pack supplied with the radar including:
  • x8 off M8 bolts A4 Stainless Steel
  • x4 off M8 spring washers A4 washers A4 Stainless Steel
  • x4 off M8 plain washers A4 washers A4 Stainless Steel
• x1 off Mount plate and mounting fixings (refer to Installation section to see examples, this will depend on your mounting choice)
• x1 M5 bolt
• Suitable earthing cable to fit to M5 bolt hole
• 5m tape measure
• A Digital Inclinometer (accurate to 0.1°)
• x2 off 25m² Radar Target (Navtech part number MBP0137)
• x2 off Tripod for mounting Radar Target (Optional, this requirement will vary depending on application)
• Pair of 2 way radios
• Adjustable spanners
• An assistant
• Radar Power Supply cable (supplied with Radar)
• A way of working safely at height

Power Supply Details

• Siemens Part Number: 6EP1332-1SH52
• 24V Stabilised Power Supply
• Input 100-240V AC
• Output 24V / 4A DC.
• Dimensions: 55mm x 90mm x 90mm
• Will snap to DIN rail EN 60715 35x7.5/15
  
  

Page contents will be auto-generated for all headings 1-3