Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Introduction

This page covers accessing and navigating the SafeGuard™ Configuration Application Dashboard, which alerts a user to alarms caused by data exceeding threshold values quickly and easily.

It also provides a live view of a connected SafeGuard™ system, which includes some raw FFT radar data , NavMode data and SafeGuard™ configuration.

...

To monitor the system using FFT and NavMode level data, and make adjustments using the config.

...

Quickly and easily be alerted to data exceeding threshold values in either mode.

...

An option to visually link an output alarm state change with a radar return within or without one of the defined areas. 

...

Ability to quickly identify areas that require immediate attention.

...

Provide an option to "look" at the raw radar data and see its proximity to the threshold value at each location. 

...

Allows the user access so they can identify any potential issues. 

...

The live display can be paused and can be reset to the most current view 

...

.

...

...

Provides the ability to view real-time or close to real-time data.

...

The application can display raw radar data, with a minimum refresh rate of 1 Hz 

...

Allow the viewing of up-to-date raw data

...

Application is able to display radar health, this can be abstracted to a single metric

...

Provides the ability to quickly assess the health of the system and identify any issues. 

For more information about SafeGuard™ please refer to this documentation: SafeGuard™ User Guide.

Plan - this will be removed once this page has been completed.

...

- Collision Avoidance.

Contents

...

Table of Contents
maxLevel3
indent16px
excludeIntroduction|Contents

...

Accessing the Configuration Application

...

Space holder for a navigation guide to the Dashboard. Similar to: https://navtechradar.atlassian.net/wiki/spaces/TUN/pages/773685283/Navigating+AdvanceGuard#Main-Display-Features

...

...

Once you have opened the Configuration Application click the Connect button to connect to the radar data:

...

After a few seconds, the app will start to display live data:

...

Navigating the Configuration Application Dashboard

...

PPI Navigation Control: Please refer to this page for more information: Configuration Application PPI

PPI: Please refer to this page for more information: Configuration Application PPI

SettingsRadar info Panel: Please refer to this page for more information: Configuration Application SettingsPPI

Navigation Data Tab: Please refer to this page for more information: Configuration Application Navigation Data

Settings Tab: Please refer to this page for more information: Configuration Application Settings

Area Alarms Panel: Please refer to this page for more information: Configuration Application Alarms

Risks

...

It might not be possible to update a raw data display in real time using standard UI technology - It's possible to update the raw data display in something close to real time, but only if we scale the image size down to 65% of the original size or less. With no scaling, 1Hz is possible

...

It might not be possible to display very large number of nav plots in real time using standard UI technology - it's possible to display either 1000 or 2000 at a time, based on a worst-case scenario where every azimuth had 5 peaks

...

Data Point Control: Please refer to this page for more information: Configuration Application PPI

Mouse Coordinates: Please refer to this page for more information: Configuration Application PPI

Log Panel: Please refer to this page for more information:

...

Related Information

Filter by label (Content by label)
showLabelsfalse
max10
cqllabel = "safeguard"