...
Enable the Config Function. Select the Areas folder in the Configuration Tree, then select New in the configuration panel.
In the configuration panel, select New Area.
This will open the New Area Wizard window. The options are as follows:
Name: Select a name that will differentiate this area from any other areas, e.g. Detection Area 001.
Type: This indicates the function of the selected Area.
General: Sets the Area as standard, non-specific area.
Detection: This Area is used to filter the detection area of the radar. This area is actually stored in the radar and is used to restrict the data being sent to only include the detection area.
Exclusion: ThisArea is also used to filter the detection area of the radar. This area is actually stored in the radar and is used to restrict the data being sent to exclude the exclusion area.
Alarm: This Area would be placed within a Detection Area, and comes with a set rule attached: any and all tracks detected within an Alarm Area automatically trigger an Alarm response.
Camera: This Area is used to restrict where camera can look, both through manual and automatic control. This ensures cameras only look where they have good line of sight and also ensures they follow any privacy restrictions.
Width (m): The initial width of the Area.
Shape: A selection of different shapes theArea can take. Once an Area is added, it can be manually shaped and resized on the PPI Map Display.
Square ⃞
Rectangle ▭
Circle ◯
Once you are satisfied with your Area values, select Finish.
...
6. Select Save to confirm your Area addition.
Video
The following video demonstrates how to create an area:
...
Arming and Disarming Areas
...
| Info |
|---|
Arming or disarming an area is the same as enabling or disabling an area. Changing Enabled in the configuration for an area is the same as using the button, however the Arm / Disarm button is only available on Alarm and General areas and provides the ability to arm or disarm the area for a specified period. |
...
Armed area:
...
Disarmed area:
...
Video
The following video demonstrates how to disarm an area for 10 minutes:
...
Related Information
| Filter by label (Content by label) | ||||
|---|---|---|---|---|
|
...