Page Comparison

Network Configuration

The demonstration equipment is pre-configured as follows:

• Subnet:   192.168.0.0/24 (mask = 255.255.255.0)
• Radar sensor:   192.168.0.1
• Camera:   192.168.0.2

Give your computer another address within the same subnet, e.g. 192.168.0.5.
If you are not sure how to do this, then either:

• Download and use the network configuration utility from here?. Unpack the two files to your desktop and be sure to use the short-cut, as this ensures the utility runs with administrator permissions (select option 1), or
• Refer to this article on how to do it manually: 
  • http://www.howtogeek.com/howto/19249/how-to-assign-a-static-ip-address-in-xp-vista-or-windows-7

You may “multi-home” your network configuration, allowing your PC to connect to another network, such as one with internet access, at the same time. Internet access is required to download a map image from Google or Microsoft. If the location of the demonstration is known beforehand, it is advisable to download a map and locate it within Witness before setting off. If on the other hand, the location is not known, we would suggest you take a smartphone with you, which can be tethered to your laptop allowing you to download a map once the demonstration location is known, assuming, of course, that you have mobile data access at the demonstration site.