...
You can change the size of the schematic by scrolling your mouse, and you can Click+Drag to change the viewable areas of the carriageway.
...
.
...
If the schematic has been reduced in size so that the moving targets can no longer be displayed, then the schematic will highlight sections with a person and/or target icon with the number of these tracks next to them.
...
Live
The Live screen displays the flow of traffic along the carriageways in real time. If the carriageways are configured with separate lanes then these will be separated by white dashed lines. The direction of the traffic is marked using arrows similar to those on the PPI Map.
...
Red dotted outlines on a carriageway section signifies that there is no radar coverage for that section. The icons representing the affected radar will also change from green (normal coverage) to orange (partial coverage) or red (no coverage).
If Traffic Analysis sections have been configured in the ClearWay™ UI (please refer to:Traffic Analysis Plugin) then these will be displayed on the schematic:
...
Live Alarm Panel
Beneath the Schematic area there is a panel to display interactive icons representing live alarm or queue incidents.
In the example below the two icons on the left-hand side show the number of live incidents (1 alarm and 3 queues9 alarms and 1 queue), and the individual icons grouped on their right then display each incident in time order.
...
Hovering over an individual icon will show the Locate icon and details regarding the alarm. Clicking on an individual icon will synchronise with the map to focus onto that area, providing that the map is selected for the lower display. It will also will synchronise with the Schematic to focus on the affected lane/section blocks on the grid.
Schematic Edit Controls
...
...
Edit: The pen icon allows you to edit the schematic.
Home: This icon will return the schematic to it’s home position and scale.
The default layout of the schematic has approximate placements of objects such as radar and POI’s. To allow you more flexibility, when you click on the grey pen icon then you are in edit mode allowing you to move these features by using your mouse to drag them into the desired place.
...
Edit: The pen icon turns green when you are in Edit mode, and is grey when not in edit mode.
For example, I want to make some changes to the Schematic and have clicked they grey pen icon to be in Edit mode:
...
When the Playback tab is selected then you will be able to playback tracks from the Live Alarms list. The track will be displayed as a moving vehicle / person / track icon in yellow:
...
To playback a track:
...
| Info |
|---|
Double-clicking on particular sections, radar, points of interest etc. on the map will synchronise with the Schematic to focus on that area. |
Map Style
...
Traffic Analysis: The top left icon is a toggle to show or hide Traffic Analysis icons on the areas and or sections which have been configured with Traffic Analysis on the carriageway. Please refer to Traffic Analysis Plugin for more information.
There are the following map styles:
...
Clicking on a radar will show the boundary of the radar range in pink and will open an info panel displaying the radar name and User ID as in the example below:
...
Traffic Analysis Areas will be outlined in orangeand Traffic Analysis icons will be displayed on sections on the carriageway if these have been configured and the toggle enabled:
...
With the Traffic Analysis toggle disabled, the Traffic Analysis areas and sections will not be displayed:
...
Live Alarms
This panel displays the highway alarms which are currently active. These would typically be triggered in response to an incident that requires a response.
...