...
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
...
Displaying a Background Image or Map
Adding, configuring and viewing the active elements of the system are made considerably more straightforward if you can view a scaled image of the area in the background. You can use a map, aerial photo, scaled diagram or an integrated mapping service of the area as your background. Aerial photos are the most useful for the initial configuration stage.
There are two types of background images; Static or Dynamic.
Static Background Image
Please refer to this documentation: Adding a Background Image for instructions when using a static image like a map, aerial photo or a scaled diagram.
Dynamic Background Image
Please view these instructions: Displaying a Map when using an integrated mapping service as your background.
Creating a Detection Area
Enable the Configuration Function, then select Areas in the Configuration Tree.
In the Configuration Panel, select New, then select Area to activate the Create New Area Wizard.
In the Create New Area Wizard, select 'Detection' from the Type drop-down list. Configure the rest of the options, and select Finish.
Use standard Creating and Editing to edit the shape and orientation of the Detection Area and position the label. Creating and Editing Entities
Edit any other details through the area configuration form as required.
Select Save.
...
Select the site in the Configuration Tree, then select Radar Detection Area Setup in the Configuration Panel.
The Radar Detection Area Setup window will open. Choose a Tracking Parameter to apply to your Detection Area from the drop down list, then select Finish.
Your Detection Area has now been assigned the selected Tracking Parameters. Tracking Parameters determine how and what the tracker detects and tracks. Learn more about Tracking Parameters here: Tracking Parameters.
...