Page Comparison

...

In addition to using dynamic sensors such as radars, the system can also monitor the outputs of static sensors such as light beams and PIR units. When a static sensor is triggered, an unmoving track is generated on top of the sensor within the Sentinel user interface graphical representation. If the static sensor lies within an existing area and rule configuration for a radar, then the static track might be suitably handled by the system in the same way as tracks generated by the radar. If not, you can create a small dedicated area which encompasses the static sensor and then apply a simple area movement rule in order to produce the required alarm response.

...

Hide: Select to hide the static sensor on the PPI.

Label Visibility: Select an option to configure the visibility of the entity labels on the PPI.

Use System

Auto Hide

Visible

Hidden

Colour: Choose a colour for the static sensor on the PPI.

...

X/Y/Z and Lat./Long.: Each new static sensor is initially assigned the default Latitude and Longitude of the installation origin. You can then adjust the X and Y settings to define the offset position (in metres) of the sensor from the origin point. You can adjust the X and Y settings either by typing the offsets into the fields or you can drag the sensor icon to the required position on the graphical representation. The Lat. and Long. values for the sensor position are calculated using the known origin point plus the X and Y offsets.

Camera Preset

The camera preset is a position that a camera will point to when the static sensor is triggered.

X/Y: Adjust the X and Y settings to define the offset position (in metres) of the Camera Preset from the origin point. You can adjust the X and Y settings either by typing the offsets into the fields or you can drag the star icon to the required position on the graphical representation.

Lat./Long.: The Lat. and Long. values for the Camera Preset are calculated using the known origin point plus the X and Y offsets.

...

Related Information